How To Assemble And Lock The Lid; How To Operate The Controls - Hamilton Beach Big Mouth 70590 User Manual

How to Assemble and Lock the Lid
Align lid as illustrated by placing thumb
on lid tab and twisting lid clockwise. Four
visual alignment markers are provided
(see illustration), one on bowl, one on
handle and two on bowl lid.
NOTE: The food processor will not
work unless the lid is locked into
position.
Food chute lid hinges onto back of
food chute. Push down lid to latch onto
food chute.
Before removing lid, switch to OFF (0)
position and wait until blade stops
rotating.
To remove food chute lid for cleaning,
place one hand in food pusher opening
and the other on food chute. Rotate
hand from left to right and lift up. This
will disengage left notch from slot and
then right notch from slot. Reverse the
directions to place food chute lid
back on food chute.
How to Operate the Controls
The control dial is conveniently located
on the front of the base. Rotate the
knob clockwise to select a speed:
1 and 2 for Low
3 and 4 for High
The processor will run continuously.
For instant on and off control, use the
PULSE (P) button by rotating knob
counterclockwise.
5