Cleaning, Storage And Maintenance; How To Release Suction Cup Feet After Use - Hamilton Beach Big Mouth 70590 User Manual

Cleaning, Storage and Maintenance
1. Wash bowl, lids, blade, discs,
removable drive sleeve and food
pusher in hot, soapy water. Rinse
and dry thoroughly. See page 5 for
information on how to remove food
chute lid for cleaning.
To clean food thoroughly from the
bowl and bowl lid/food chute,
immerse in hot, soapy water.
NOTE: Do not store unit with lid in
locked position; this may put strain
on interlock tab.
2. Wipe base, control panel, and cord
with a damp cloth or sponge.
To remove stubborn soil, use a mild
non-abrasive cleanser.
3. To store, place bowl on base.
Then place Chopping/Mixing Blade
on motor shaft and Slicer/Shredder
Disc on Chopping/Mixing Blade.
The Removable Drive Sleeve may be
stored in the bowl. Place lid on bowl
but do not lock.
4. Monthly place a drop of vegetable oil
on each screw in the food chute.
How to Release Suction Cup Feet
After Use
The suction cup feet on the bottom of
your Big Mouth
TM
Food Processor are
designed to keep the unit stationary
during use. To maximize the life of your
Big Mouth
TM
please review the following
directions:
With Big Mouth TM fully assembled: lift it
from counter by
placing hands
under unit as
shown and lifting
to one side.
OR
With Big Mouth
TM
fully assembled: lift it
from counter by
grabbing the han-
dle as shown and
lifting from same
side as handle.
OR
With bowl and lid removed from Big
Mouth": lift it
from counter by
placing hands
under unit as
shown and lifting
to one side
11