Lenovo V370 Hardware Maintenance Manual page 63

Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
a PRC/MTM Label
b Brazil Label (WLAN) or WLAN Label for US/CA/TW or Israel Label for
WLAN
c Brazil Label (BT) or BT Label for US/CA/TW
d SAR Label
Malaysia Homologation Label
e
f Malaysia Sirim Label (BT)
g
Indonesia D side Label
h ECC Label
i PPT Label
Rating Label
j
k Wistron Label
l COA Label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
e
f
a b
c
d
i
h
g
Lenovo V370
j
l
j
k
59