Lenovo IdeaPad U350 Quick Setup

Lenovo
IdeaPad U350
Setup Poster
V2.0
Read the safety notices and important tips in the
included manuals before using your computer.
Unpack
Computer Battery pack
Power cord* Optical disk(s)
(specific models only)
Manuals
- Setup Poster
- User Guide
- Other publications
* Power cords vary by country/region.
1 Some models may contain items that are not listed.
If any item is missing or damaged, please contact your retailer.
2

Initial setup instructions

1 Install the battery pack
1. Insert the bottom end of the battery pack into the battery bay of the
computer.
2. Press the other end (with the metal contact) until the battery pack
clicks into place.
Attention:

Make sure that the battery latch is in the locked position when installing the
battery pack. Attempts to forcibly press the battery pack in while the latch is
in the unlocked position can damage the latch mechanism.
If the latch is in the unlocked position when you attempt to install the battery
pack, remove the battery pack and the latch should immediately return to
the locked position. Reinstall the battery pack.
2 Connect to the power
AC adapter
3
Attention:

Connect the power cord to the AC adapter firmly, poor connections may
result in damages to the AC adapter.
P/N: 148001468
Printed in China
Lenovo IdeaPad U350 SP V2.0_EN_p1
Press the power button
3
Configure the operating system following the
4
on-screen instructions
Lenovo, Lenovo logo, IdeaPad, VeriFace and OneKey are either registered trademarks or trademarks of Lenovo
in the United States and/or other countries.
Copyright Lenovo 2009.