GE Profile GSD5610 Owner's Manual page 14

Loading the dishwasher racks.
For best dishwashing results, follow these loading guidelines. Features and
appearance of racks and silverware baskets may vary from your model.
Upper
Rack
The upper rack is tbr glasses, cups and saucers.
(;lips and glasses fit best along tile sides. This is
also a se(_lre place tbr dishwasher-s_de plastics.
The cup shelf (on some models) may be placed
in tile up or down position to add flexibility. A
wine glass holder (on some models) se(xu'es wine
glasses at an an_te for best _ashabilil_ Because
wine lasses COllieill various sizes after loadin,y
slowly push in the rack to make sure they will clear
the top of tile dishwasher.
The upper rack is good tor all kinds ot odd-shaped
utensils. Saucepans, mixing bowls and other items
should be placed fitce down. Fold-down fin_,-ers
o
(on some models) provide flexibilityt0r
extra-large and hard-to-fit items.
Secure largerdishwasher-safe plasticsovertwofingers
whenpossible.
Makesuresmafl p lasticitemsaresecure so theycan't fall
oeto theheater
Be sure that items do not protrude through the bottom of
the rack and block rotation of the middle spray arm. This
could result in poor wash performance for items in the
upper rack.
Checkto make sure that tall items will not block rotation of
the top wash arm,
14
The Wash Tower
Keep the center area clear ie the lower rack
Tile wash tower rises
throtlgh
tile center of the lower
rack during tile _ash and rinse portions of tile cycle.
Tile wash tower shoots water into tile mid-level wash
arm located under the upper rack. Blocking the
wash tower could result ill poor wash performance
tot items in the upper rack.
Don'tblockor load tagthingsnext to the
WashTower