GE Nautilus GHD3500 series Owner's Manual page 22

Before you call for service...
I !!![ !J !J ! ' I I IIq [! I!! I!J'I!H I!lJIJ ql !JJ
Troubleshooting tips
=%,_o
}
i!':_!
:El;
1/
v :
i: ::?::
22
Dishesand flatware
not clean
Possible Causes What ToDo
Low inlet water
temperature,
_-_ M ake sure inlet water
temperature is correct
(see page 12)_
Spots and filming
on glasses and
flatware
Water pressure is
temporarily low
Air gap is dogged
Improper rack loading
F_tremely hard water
Low inlet water
temperature
Overloading the
dishwasher
Improper loading
Old or damp powder
detergent
Rinse agent dispenser
empty
Too little detergent
":_ U se HOTSTARToption.
_r_
Turn on a faucet. Is water
coming out more slowly
than usual? If so, wait until
pressure is normal before
using your dishwasher.
_ Clean file air gap.
Make sure large dishware
does not block fire
detergent dispenser or the
wash arm.
Use Jet-Dry ® rinse agent
m remove spots and
prevent new fihn build-up,
To remove stubborn spots
and pre-existing fihn from
glassware:
I Remove all metal utensils
fa'om dae dishwaslaer.
2 Do not add detergent.
3 Select dre longest cycle,
4 Start file dishwasher and
allow to run for 18 to 22
minutes, Distawasher will
now be in the main wash.
Open the door and pour
2 cups (500 ml) of white
vinegar into the bottom
of tire dishwasher.
Close fire door and allm_
to complete the cycle,
If vinegar rinse doesn't
work: Repeat as above,
except use 1/4 cup (60
ml) of citric acid crystals
instead of vinegar,