GE WBVH5200 Owner's Manual & Installation Instructions page 15

Installation
I structio
her
i
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•IMPORTANT - Save these instructions
for local inspector's use.
• IMPORTANT - Observe a,,
g overning
codes and ordinances.
• Note to Installer
- Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep
these instructions
for future reference.
• Skill level - Installation of this appliance requires
basic mechanical and electrical skills.
Completion time - 1-3 hours
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
FOR YOUR SAFETY:
-AWARNING
• This appliance must be properly grounded and
installed as described in these Insta!!ation Instructions.
• Do not install or store the appliance in an area where
it will be exposed to water/weather. See the Location
of Your Washer section.
NOTE: This appliance must be properly
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
TOOLS REQUIRED FOR
WASHER INSTALLATION
1/4" nut driver
3/8" socket with ratchet
rj 3/8" open-end wrench
Adjustable wrench or 7/16" socket with ratchet
Adjustable wrench or 9/16" open-end wrench
Channel-lock adjustable pliers
Carpenter's level
PARTS SUPPLIED
@
Water Hoses (2)
Cable Tie
Hose Guide
STACK BRACKET KIT
A stack bracket kit is available at additional cost.
It can be ordered in the United States by visiting
our website at ge.com or calling 800.GE.CARES.
Order kit #WE25X10018 or STACKITIWW.
15