Advertisement
Available languages
Available languages
ge.com
OPERATION
Possible Causes
What To Do
Washer won't operate
Washer is unplugged
• Hake sure cord is plugged securelu into a working outlet.
Water supplg is turned off
• Turn both hot and cold faucets fully on.
Controls are not set properlg
• Check controls.
Lid is open--safetg feature
• Close lid and reset cycle, to the beginning if necessary.
prevents agitation and
spinning when lid is up
Circuit breaker/fuse is
• Check house circuit breakers/fuses. Replacefuses or
tripped/blown
reset breaker.Washer should have separate outlet.
Electronics need to be reset
• Unplug washer,wait 2 minutes, plug back in and press START.
START was not pressed
• PressSTART.
Lid magnet missing
• Callfor service.
Time not shown
Unit filling
• This is normal. Estimated time remaining is updated during
on display
fill time.
Movement inside machine
Shifting mechanism is
• When the machine is manually turned off, the shifter will
when shut off
disengaging the motor
disengage the motor before completely shutting down.
If lid is raised before the motor is disengaged, it will resume
when lid is closed.
PERFORMANCE
Possible Causes
What To Do
Clothes too wet
Incorrect spin cgcle
• Hake sure the spin cgcle selected matches the load gou are
selected
washing.Somefabricswillfeelwetter when rinsedwith coldwater.
Colored spots
Incorrect use of fabric
• Check fabric softener package for instructions and follow
softener
directions for using dispenser.
• Pretreat stain and rewash.
Dge transfer
• Sort whites or lightlg colored items from dark colors.
Grayed oryellowed
Not enough detergent
• Use more detergent (especiall g with larger loads).
clothes
Be sure to follow detergent manufacturer's directions.
Hard water
• Use a water conditioner likeCalgon brand or install
a water softener.
Water is not hot enough
• Make sure water heater is delivering water at
120°F-140°F (48°C-60°C).
Washer is overloaded
• Select load sizeto match clothes load.
Detergent is not
• Add detergent as wash basket fills with water before
dissolving
gou load clothes.
Dge transfer
• Sort clothes bg color. If fabric label states wash seporotelg,
unstable dges mag be indicated.
Lint or residue on
Clothes are air or line dried
• If you do not dry your clothes with a clothes dryer, your
clothes
clothes may retain more lint.
Incorrect sorting
• Separate lint producers from lint collectors.
Washing too long
• Wash small loads for a shorter time than larger loads.
Detergent not dissolving
• Add detergent as wash basket fills with water, before you
load clothes.
• Trg a liquid detergent.
• Use warmer water temperature.
Overloading
• Load clothes no higher than the top row of holes in the
washer basket.
• Make sure load size selected matches clothes load size.
Incorrect use of fabric
• Check fabric softener package for instructions
softener
and follow directions for using dispenser.
11
Advertisement
