GE Profile PSC23MGSABB Owner's Manual And Installation Instructions page 4

Models 23, 25, 26, 27 and 29
Table of Contents

Advertisement

IMPORTANTSAFETY INFORMATION.
READALLINSTRUCTIONS BEFORE USING.
WARNING!
HOWTOCONNECT E LECTRICITY
Do not, under any circumstances, cut or remove the third (ground)prong from the power cord.
For personal safety, this appliance mustbe properly grounded.
The power cord of this appliance
is equipped with
a 3-prong (grounding)
plug which mates with
a standard 3-prong (grounding)
wall oudet to
minimize the possib'tlity of electric shock hazard
from this appliance.
Have the wall outlet
and circuit
checked
by
a qualified
electrician
to make
sure the oudet
is properly
grounded.
If the outlet is a standard 2-prong outlet, it is
your personal responsibility and obligation to
have it replaced with a properly grounded
3-prong wall outlet.
The refrigerator
should always be plugged into
its oval individual electrical outlet which has
a voltage rating that matches the radng plate.
This provides the best performance
and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.
Never unplug your refrigerator by pulling on
the power cord. Always grip plug firmly and pull
straight out from the outlet.
Repair or replace immediately all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end.
When moving the refrigerator away from the
wall, be careful not to roll over or damage the
power cord.
USEOF ADAPTER PLUGS
(Adapterplugs notpermitted in Canada)
Because of potential safe_/ hazards under certain conditions, we strongly recommend against
the use of an adapter plug.
However,
if you must use an adapter,
where
local
codes peiwnit, a temporary connection may be made
to a properly
grounded
2-prong
wall oudet by use
of a UL-listed
adapter
available
at most local
hard_ore
stores.
The larger slot in the adapter
must be aligned with
the larger slot in the wall outlet to provide proper
polarity in the connection
of the power cord.
When
disconnecting
the power
cord from the
adapter,
always hold the adapter
in place with one
hand
while pulling
the power
cord plug with the
other
hand.
If this is not done,
die adapter
ground
temtinal
is very likely to break
_th
repeated
use.
If the adapter ground terminal breaks, DO NOT
USEthe refrigerator/mtii
a proper ground has
been established.
Attachingthe adapterground terminalto a waft outlet
coverscrewdoesnotground theappliance unless the
coverscrewis metal, and not insulated, a nd the wall
outlet is groundedthroughthe housewiring. You should
havethecircuitcheckedby a qualifiedelectricianto
makesurethe outlet is properlygrounded.
READ ANDFOLLOW THIS SAFETY I NFORMATION CAREFULLY.
SAVETHESE INSTRUCTIONS
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents