Surface Units; Care And Cleaning; Control Knobs; Oven Vent - GE JB690 Owner's Manual

Care and cleaning of the range, g,oom
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is reengaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Gareflflly grasp a corner of the protective
shipping fihn wifll your fingers and slowly
peel it from d_e appliance surfi_ce. Do
not
use any shaIp items to remove file
fihn. Remove all of the film before using
the appliance for the first time.
To assure no damage is done to file
finish of file product, file safest way to
remove the adhesive flom packaging
tape on new appliances is an application
of a household liquid dishwashing
detergent. Apply with a soft cloth and
allow to soak.
NOTE:The adhesive mustbe removed fromall
parts.It cannot b e removed if it is bakedon.
Control Knobs
Thecontrol k nobsmaybe removed foreasier
cleaning.
Make sure the knobs are in the OF/:
positions and pull them straight off the
stems for cleaning.
The knobs can be cleaned in a
dishwasher or flley may also be washed
Mill soap and wateL Make sure the inside
of file knobs are dry before replacing.
Replace the knobs, in the OFFposition to
ensure proper placement.
Oven Vent
Theovenventislocated behindtherightrear
surface unit.
This area could become hot during
oven use.
It is normM for steam to come out
of the vent, and moisture m W collect
underneath it when the oven is in use.
Theventis important f orproper air circulation.
Never b/ockthis vent.
25