Installing A J-Model In An Existing Wall Case - GE AJCM Series Owner's Manual And Installation Instructions

Installation Instructions
INSTALLING A J-MODEL IN AN EXISTING WALL CASE
Reod these instructions completely ond corefully.
r_ REMOVE LOCKING PLATE ON FRONT
LEFT SIDE
Locking
plate
Remove
screw
I
({
((
II Ill /
12]REMOVE ALL SHIPPING PADS
(IF PRESENT) INSIDE AIR CONDITIONER
NEXT TO COMPRESSOR
Remove
shipping
pads(if
present)
[] REINSTALL LOCKING PLATE WITH TAB
BEHIND WALL CASE FLANGE. TIGHTEN
SCREW
r_ ATTACH POWER CORD TO BASE PAN
WITH CLAMP
pan
F6"] A TTACH FRONT GRILLE
An opening for the power cord is on the bottom
of the front grille.
131 CAREFULLY SLIDE AIR CONDITIONER
BACK INTO CASE
Make sure that the tubing on the unit does
not touch the wall case and that the case
installation is secure.
"1
%
14