Everpure Single Housing CGS-10 10 Specification Sheet

Foodservice System Housing for Drop-In Cartridges
I N S T A L L A T I O N T I P S
Choose a mounting location suitable to support
the full weight of the system when operating
Install vertically so bowl hangs down
Allow 2-1/2" clearance below the cartridge for
easy cartridge replacement
Make sure O-ring on bowl is sufficiently
lubricated
Always screw on bowls by hand; do not use a
housing wrench
Flush filter by running water through filter
according to cartridge instructions
DEV9100-10
C G S - 10 10" Sin gl e Hous i ng
CGS-10 10" Single Housing: DEV9100-10 CGS-10 10" Single Housing: DEV9100-10
O P E R A T I O N T I P S
Change cartridges on a regular 6 month
preventative maintenance program
Change cartridges when capacity is reached or
when pressure decreases
Always inspect O-ring; change and/or lubricate
if necessary
Clean bowl with mild solution of detergent
before inserting new cartridge
Always flush the filter cartridge at time of
installation and cartridge change
B E N E F I T S
10" low profile Slim Line single bowl housing
Manufactured of durable polypropylene and has
excellent chemical resistance
System includes pre-mounted water pressure
gauge
Equipped with a pressure relief button to relieve
water pressure during cartridge changes
Includes wall mounting bracket and hardware for
fast and easy installation
System is shipped fully assembled
Choose the appropriate cartridge for your needs
Cartridge sold separately
A P P L I C A T I O N / S I Z I N G
For foodservice applications
Bowl housing assembly accepts drop in cartridges
Capacity: varies according to filter cartridge used