Philips SCB2100NB User Manual

SCB2100NB
User Manual
EN
Manuel d'utilisation
FR
Guía de usuario
ES
Bedienungsanleitung
DE
Gebruikershandleiding
NL
Manuale d'uso
IT
Manual do utilizador
PR
GR
Kullanım kılavuzu
TR
Brugervejledning
DK
Använderhandbok
SV
Käyttöohje
SF
Instrukcja obsługi
PL
Uživatelská příručka
CZ
Návod na použitie
SK
Felhasználói kézikönyv
HU
RU
0682
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
A)
B)
Set the switch to
Ni-MH or Ni-CD!
C)
D)
Battery charging times:
Battery Battery
size capacity (mAh) charging time
AA Ni-MH 2600 mAh
AA Ni-MH 2300 mAh
AA Ni-MH 1800 mAh
AA Ni-MH 1300 mAh
AAA Ni-MH 700 mAh
9VNi-MH 170 mAh
C Ni-MH 2200 mAh
D Ni-MH 4800 mAh
AA Ni-Cd 600 mAh
AA Ni-Cd 800 mAh
AA Ni-Cd 1000 mAh
Additional information (including warranty conditions)
available at our website:
www.philips.com/support
Specifications subject to change without notice.
All dimensions shown are approximate.
SCB2100NB Universal Charger
Important Safety Instructions:
Save these instructions - this manual contains important safety and operating
instructions for this charger. Before using your charger read all instructions and
cautionary markings on the charger, the batteries to be charged and the
products that use the batteries.
Warning:
• Use to charge Ni-MH and Ni-Cd batteries only. Do not charge Alkaline, Zinc
Carbon, Lithium or any other type of battery not specified on the charger.
Other types of batteries might burst or leak causing personal injury.
• For proper battery insertion, please observe pole indications (+/-). See fig.A.
• Do not dispose of in fire, short circuit or open.
• Charge new batteries before using.
• Never alter the AC cord or plug.
• Do not operate the charger if it has been subjected to shock or if it is
damaged.
• Do not disassemble the charger.
• To avoid risk of electric shock, unplug the charger from the electrical outlet
before cleaning or when not in use.
• This battery charger is for indoor use only. Do not expose the charger to rain
or excessive moisture. Keep the charger away from dust and dirt, which can
cause premature wear of parts or harm its normal operation.
• Never use the charger as a power source for any electrical equipment.
• Do not incinerate, disassemble or short circuit batteries since they may burst
or release toxic materials.
• This charger is not intended for use by young children or infirm persons
without supervision.
• To reduce the risk of damage to the AC plug and cord, disconnect the charger
by pulling the plug and not the cord.
• Do not operate the charger if cord or plug is damaged.
• Do not charge AAA and AA batteries in the same slot.
• Charge Ni-Cd and Ni-MH batteries separately.
• Do not charge damaged or leaking batteries.
Care:
• Wipe the charger with a damp cloth occasionally without harsh chemicals,
cleaning solvents or strong detergents.
• Charger and batteries must be disposed of separately. Inform yourself about
the separate collection system for electrical and electronic products.
Operating Instructions
General charging guidelines
• At the same time you can charge 2 or 4 AA,AAA, C or D batteries or 2 9V
Approx.
batteries.
• You can charge NiCd or NiMH batteries. Set the Ni-Cd / Ni-MH switch in the
correct position (Ni-Cd or Ni-MH). See fig. B.
12 ½ hrs • Make sure batteries in each pair of slots (1/2 and/or 3/4) are identical (same
capacity, size and chemistry type).
10 ¾ hrs
• To keep your batteries in the best condition, you have to limit the charging
8 ½ hrs
time according to the charging table. See fig. D. You can limit the charging time
by disconnecting the plug from the outlet and remove the batteries.
6 ¼ hrs
• For long battery life, only charge empty batteries.
8 ½ hrs
• When charging, ambient temperature should be between 0°C and 40°C
13 hrs (32°F and 104°F).
9 ¾ hrs
Note: It is normal for the unit and the batteries to become warm while charging.
21 ¼ hrs
Charging batteries
7 ¾ hrs
1 Lift up the charger cover and insert batteries into the battery charger.
10 ½ hrs
See fig.A.
2 Set the Ni-Cd / Ni-MH switch in the correct position (Ni-Cd or Ni-MH).
13 ½ hrs
See fig. B.
3 Connect the plug into a household electric outlet. See fig. B.
> The CHARGE LED(s) light(s) up red indicating that charging is in progress.
> If the batteries are not installed correctly,
the CHARGE LED(s) will not light and the charger will not start charging.
> When the batteries (AA,AAA, C or D) are fully charged, the CHARGE LED(s)
go(es) out and the charger switches off.
> When charging 9V batteries the CHARGE LED(s) will remain lit until the charging
is stopped manually. See fig. C.
Make sure not to exceed the charging time for 9V batteries. See fig. D.
3 When you are going to use the batteries, disconnect the plug from the outlet
and remove the batteries. See fig. C.Always unplug between charges!
Battery charging times: See fig. D.
English
Visit our website at: www.philips.com