GE DSS25MSSHSS Owner's Manual And Installation page 20

Insertingthe doorpanels.
Read these instructions completely and carefully.
0 Insert the Freezer Panel and Fresh Food Panel
Carefully push the fi'eezer panel in until it slides If your model has a (lispense_; this step only applies
into the slot behind the door handle. Push the filler to the fl'esh fl_od panel and top fl'eezer panel.
panel (required with some door panels) in behind
the decorator panel, Repeat fin" fl'esh fl)od panel,
0 Insert the Bottom Freezer Panel (on dispenser models).
Carefull_ push the panel in until it slides into the (required with some door panels) in behind the
slot behind the door handle, Push the filler panel decorator panel,
Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be tound inside the reii_igerator each (loo_; Hand tighten only: Make sure that the
compartment, top of each panel fits snugly behind the lip of the
With a T-20 Torxdrive_; attach the Top Trim, using Top Trim.
two screws on each Top T_im piece, to the top oI
Cut-Out
t
SideTrim
20