Features; Startingthe Freezer - GE FUM9 Owner's Manual & Installation Instructions

About the operationof yourfreezer, www.GEAppliances.co
Startingthe Freezer
_] Clean the inside of the fl'eezer with a mild solution of baking soda and water (see Care and Cleaning).
[_ Connect cord to power outlet.
[_On models with a Temperature Monitor or
High-Temp
Mmm Switch, set the switch to the
OFFposition.
[_ Make sure the temperature control is set at 4.
[_ Mlow fl'eezer to operate fl)r at least fimr hom_ before placing fl_od inside.
@(-)n models with a Temperature Monitor or High-Temp Mam_ Switch, set the switch to the
O/Vposifion.
Temperature Control
Freezing temperature selection is made by
setting the control fl'om Ito
7
(coldest).
If you W;lIlt
colder
or W;llillei" [eI/ll)eI';IttlI'es _
a(!)ust the control one step at a time.
Mlow several l_otus after each one-step
a(!iustment fi)r the freezer temperature to
stabilize.
Turning the comrol to OFFstops the cooling
process but does not shut off power to the
freezei:
( rEMP ALAnM POWEnON
k o_F oN j
Located o17 front of freeze_
o. 0 o,,
HIGH-TEMP
Located on back of lid.
Temperature Monitor/High-Temp Alarm
An alam_ will sotmd if the h'eezer
temi)eramre reaches tmsafe levels.
The almm operates on household
electricip,,:/t the power fifils, the almm
Mll not perfimn.
An O/V/OFFswitch allows the teml)erature
almm to be deactivated if desired. The
ti'eezer is shipi)ed with the switch in the
OFFposition. _Mier the ti'eezer has run
long enough to lower the temperature,
you may set the switch to the ONposition.
Switch (onsomemode/s)
CAUtiON: Addingmorethan3 pounds(1.5kg)
of warm food per cubic foot of freezer capacity
can trigger the a/arm.
To activate the alarm, set the switch to the
O/Vposition.
To deactivate the alarm, set the switch to the
OFFposidon.