GE AGM14 Owner's Manual And Installation Instructions page 12

WindowInstallation Instructions.
Remove the Air Conditioner From the Case
[]Remove the 2 shipping screws from the back of
the case.
[]Remove the 2 screws on each side of the case.
Keep these for later use.
Shipping screws
[]Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
Prepare the Window and the Case
[] Cut the window sash seal to the proper length. [] Remove the backing from the top mounting
Peel off the backing and attach the seal to the rail seal strip and attach the seal to the bottom
underside of the window sash. of the top mounting rail.
[R] Carefully insert the plastic frame guides into
the bottom of the case on each side.
Bottomofcase
[_ Install the top mounting rail with 3 )pe A
screws on the inside of the case. Insert the
frames for the accordion panels into the top
mounting rail and the frame glfides. Attach
the accordion panels to the side of the case
using 5 type A screws.
Topmountingrail
O-
12
Frame guides