GE WJSR2080T Owner's Manual page 14

Beforeyou call for service...
Troubleshooting tips
Save time and n7oney! Review the charts on the following pages
first and you may not need to call for service.
. /
. Possible Causes -- What ToDo , . "_
Washer'is unplugged
" * Make sure cord is plugged
securely into a working
outlet.
Water supply is turned off
* Turn both hot and cold
faucets fully on.
(kmtrols are not set * Check controls and
properly make sureCycle knob is
pulled out to ONposition.
lid is open • Close rid and pullCycle
knob out to ONposition.
Circuit breaker/fuse is
• Check house circuit
Wipped/biown breakers/fuses. Replace
fuses or reset breaker.
Washer should have
separate outlet.
Control is not set properly • Checkwater temperature
control and adjusL
Water supply is turned off
or improperly connected
Water
valvescreensare
stopped up
* Turn both hot and cold
faucets fully on and make
sure hoses are connected
to correct faucets:
| .
.* Turn offthe water source
•and remove the water
connection hoses from
the upper brick of the
washer. Use a brush or
toothpick to Clean the
screens in the machine.
Reconnect the hoses and
turn the water back on.
House water heater is * Make sur6 house water
not set properly heater is delivering water
o o
at120 F.-140 F.
O " O -
- , (48 C.-60 C.).. _ ....
-`, .. _. :- : - : -?.