Download Print this page
Philips LVL Series Specifications
Philips LVL Series Specifications

Philips LVL Series Specifications

Vandal-resistant wet/damp location lighting

Advertisement

Quick Links

V
ANDAL
LVLW
7.66"
(19.46 cm)
8.67"
(22.02 cm)
3.72"
(9.45 cm)
-R
W
ESISTANT
Features
Illumination: Illumination
is provided by two high-
performance 5.5 W, 6 VDC
MR16-style halogen lamps.
Lamps are held in an attractive
molded swivel assembly, and
are fully adjustable.
Housing: The high-abuse
housing, backplate and
electronics shell are molded
from high-impact, F1 rated,
®
GE Lexan
polycarbonate. All
injection molded components
meet the UL 94 V-0, 5 VA
flame retardant standard for
emergency lighting products.
All units are supplied standard
with a UL damp location
listing and tamperproof screw
kit. Optional wet location
listed products include a fully
gasketed cover. Installation
is simplified by the use of a
snap-together backplate and
housing. When installed with
the supplied tamperproof
screw kit, removal from
mounting surface, or removal
of outer protective cover is
not possible under normal
service conditions without the
use of a torx T-15 bit. Utility
supply is completed by use of a
modular plug-in wiring harness.
A convenient knockout is
also made available in the top
right section of product to
accommodate 1/2" conduit
(damp location listed units
only).
LVL Series
/D
L
ET
AMP
OCATION
Operating Temperature
Range: Damp location
50°F (10°C) to 104°F (40°C)
Wet location
41°F (5°C) to 104°F (40°C)
Wet location with heater
-4°F (-20°C) to 104°F (40°C)
Electronics: 120/277 VAC
dual voltage input with surge-
protected, solid-state, fully
automatic, voltage regulated
charger. Charging system is
complete with low voltage
disconnect, AC lockout,
brownout protection and
combination indicator lamp and
illuminated test switch.
Electrical Specifications:
0.05 A (120 VAC)
0.30 A (120 VAC) with heater
option
0.02 A (277 VAC)
0.13 A (277 VAC) with heater
option
Job Information
Job Name:
Cat. No.:
Notes:
L
IGHTING
Battery
Maintenance free, sealed
lead calcium battery has an
expected service life of 5
years. Upon utility power
failure or brownout, the unit
shall automatically provide
emergency battery power and
maintain the stated illumination
level and output wattage for a
minimum period of 90 minutes.
Code Compliance
UL 924, UL damp location,
and optional UL wet location
listed. NFPA 101, NEC, BOCA,
OSHA and IBC illumination
standards. Meets ADA
specifications for wall mounted
lighting fixtures.
Warranty
Three year full electronics
warranty. One year full plus
four year prorated lead calcium
battery warranty.
Type:
Page 1 of 2

Advertisement

loading

Summary of Contents for Philips LVL Series

  • Page 1 LVL Series ANDAL ESISTANT OCATION IGHTING Page 1 of 2 Features Operating Temperature Battery LVLW Illumination: Illumination Range: Damp location Maintenance free, sealed is provided by two high- 50°F (10°C) to 104°F (40°C) lead calcium battery has an performance 5.5 W, 6 VDC Wet location expected service life of 5 MR16-style halogen lamps.
  • Page 2 * The optics layout shown is intended to be used as reference only. Standard reflectances used were 80/50/20. Lightolier is not responsible for site specific conditions that may alter the results. Philips Lightolier Job Information Type: e: lol.webmaster@philips.com t: (508) 679-8131 w: www.lightolier.com LVL Series September 17, 2012 Specifications are subject to change without notice. © Koninklijke Philips Electronics N.V., 2012. All rights reserved.