Volvo S60 Owner's Manual page 97

NOTE
•
The use of daytime running lights is
mandatory in Canada.
•
Continuous high beams cannot be acti-
vated when the headlight switch is in
position . High beam flash will
function in this position.
Active Bending Lights (ABL)*
Headlight pattern with the Active Bending Light
function deactivated (left) and activated (right)
When this function is activated, the headlight
beams adjust laterally to help light up a curve
according to movements of the steering wheel
(see the right-pointing beam in the illustration).
1 The factory default setting is on.
1
ABL is activated automatically
engine is started.
The function can be deactivated/reactivated in
the MY CAR menu system under
Active Bending Lights or under
Car settings Light settings
Bending Lights.
See page 133 for a description of the menu
system.
NOTE
This function is only active in twilight or dark
conditions, and only when the vehicle is in
motion.
If a fault should occur in the system, the symbol
will illuminate and a message will be displayed
as shown in the table.
03 Your driving environment
when the
Symbol
My S60
Settings
Active
*
Option/accessory, for more information, see Introduction.
Lighting
Display Explana-
tion
Headlamp The system
is not func-
failure
tioning
Service
properly and
required
should be
inspected/
repaired by
a trained
and qualified
Volvo serv-
ice techni-
cian.
03
``
97