Sharp AQUOS LC-40LE835U Operation Manual page 22

Watching TV
Antenna & Cable/STB
Select the type of connection you will use to
watch TV.
3
Press c / d to select "Antenna & Cable" or "Set-
top box", and then press ENTER.
Antenna & Cable
To watch TV via an antenna or cable
connection (without using a set-top box):
Select "Antenna & Cable", and then go to step 4.
To watch TV via a set-top box:
1 Select "Set-top box", and then press ENTER.
2 To watch TV, select the input source
corresponding to the terminal connected to the
set-top box. When doing so, you must make
the setting to skip "TV". Press c / d to select
"On", and then press ENTER.
On
• When this is set to "On", the channel on the TV
cannot be changed using the remote control unit or
menu. (e.g. CH
• See page 33 for details on the Input Skip function.
3 Press INPUT to select the input source
corresponding to the terminal connected to the
set-top box. Make the necessary settings on
the connected external equipment.
• See the operation manual of the connected
equipment for setting up the equipment.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
4
Press c / d to select "Air" or "Cable".
Press ENTER to enter the setting.
Air
20
Set-top box
Off
/ , Favorite CH, etc.)
Cable
CH Search (Channel search)
Channel auto search makes the TV look for all
channels viewable in the set area.
5
When "Air" is selected in Antenna setting:
Press c / d to select "Start", and then press
ENTER.
Start
When "Cable" is selected in Antenna setting:
1 Press a / b to select "Analog & Digital Search
Start" to search both analog and digital
broadcasts, or to select "Analog Search Start"
to search only analog broadcasts, and then
press ENTER.
Analog & Digital Search Start
Analog Search Start
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel",
and then press ENTER.
2 The Channel search results may include
scrambled channels or channels that are not
viewable in the set area. Press c / d to select
"Yes", and then press ENTER to remove
scrambled channels.
Yes
Cancel
Cancel
No