3D Setup - Sharp AQUOS LC-40LE835U Operation Manual

Enjoying 3D Image Viewing

3D Setup

You can make various settings to enhance 3D image viewing.
Example
System Options
View Option
3D Setup
AQUOS LINK Setup
Input Terminal Setting
1
Press MENU to display the MENU screen, and then
press c / d to select "System Options".
2
Press a / b to select "3D Setup", and then press
ENTER.
3
Press a / b to select a specifi c item, and then press
ENTER.
4
Press a / b (or c / d ) to select the desired setting,
and then press ENTER.
5
Press MENU to exit.
3D Auto Change
This setting can be used to switch to 3D mode
automatically when a 3D identifi cation signal is
detected.
Yes: When a 3D signal is detected, 3D mode is selected
automatically.
No: Auto change is not performed.
• 3D signal may not be detected depending on the signal
format.
2D 3D Convert Effect
➝
You can adjust the 3D effect when converting images
from 2D mode to 3D mode.
Select a desired level of convert effect from +1 to +16.
• This function is only available when converting 2D images
to 3D images.
• When you use this function, image conversion on the TV
will result in some differences in the original images and
how they appear.
• 2D images that have been converted to 3D images may be
viewed only for personal use.
3D Still Image Effect Setting
Select the method for adjusting the 3D still image
effect (depth).
Auto: Adjusts the still image effect (depth) automatically.
Manual: Manually adjust the still image effect (depth).
• If you selected "Manual", adjust the 3D still image effect
(depth) with "3D Still Image Effect Adjustment".
• This function can be adjusted when viewing 3D still images
in USB mode.
• Even if you selected "Auto", the 3D still image effect (depth)
may not be correctly adjusted depending on the 3D still
image.
• 3D still images taken in macro mode will be displayed with
excessive depth.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
3D Still Image Effect Adjustment
You can adjust the 3D still image effect (depth).
Adjust the level from –5 to +10. "0" is the level where
no adjustment is made (factory preset value).
• This function can be adjusted when viewing 3D still images
in USB mode.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
Viewing Time Info
This displays the elapsed time of 3D image viewing.
Yes: Displays the elapsed viewing time on the screen
every hour.
No: Does not display the elapsed viewing time.
3D Test
This displays 3D images for testing the 3D operation.
Clicking "Start" on the screen plays back 3D test
images.
• If you press RETURN during playback, the previous
screen will be displayed.
3D Glasses Control
To enable this function, set "TV Location" to "Store".
Selecting "Yes" prevents the 3D Glasses from receiving
3D signals from other TVs.
45