Advertisement
Installation
Mounting PN-TPC1W on Sharp PN-L601B
Displays
1. Before beginning
Make sure to turn off the monitor and remove the AC power.
2. Items needed
• Sharp PN-L601B
Touchscreen Display
• PN-TPC1W
• Mounting Plate
• AC Power Adapter
• 4 x M4 (0.7x10mm) screws
• 2 x M3 (0.5x5 mm)
• Phillips
3. Attach the mounting plate
There are 8 holes on the
mounting plate, but only use 4
holes to match the monitor's
mounting holes depending on the
monitor model.
The mounting plate is attached to
a similar Sharp "PN" series
display as an example in Figure
2.
Secure the mounting plate to the
monitor with four included M4
screws.
®
Screw Driver
2
Figure 1
Advertisement
