Philips NORELCO 6955XL User Manual page 9

ENGLISH
16
C
Remove and clean one cutter and comb at
7
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8 Separate the cutter from the comb.
C
Only brush the cutter in an upward motion.
9
Use the short bristled side of the brush.
C
Brush the slots of the comb.
10
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
model HQ110 or alcohol). This helps prevent wear
of the shaving heads.
C
Replace the cutter and comb into the
11
Razor Head Assembly.
Repeat the process for the other two sets
12
of cutters and combs.
Replace the frame.
13
1
C
Turn the wheel clockwise until it locks into
14
place.
2
C
Replace the Razor Head Assembly back on
15
razor.
Put the protective razor head cap on the
16
razor to protect heads.
After Each Use: Trimmer (6955XL)
Turn razor to OFF (O) position.
1
C
Push trimmer slide switch up to pop up
2
trimmer.
C
3 Clean trimmer with the brush every time
you use it.
C
Lubricate the trimmer teeth with one drop
4
of mineral oil every 6 months.
Close trimmer by sliding trimmer switch
5
down.
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050.
ENGLISH
17 17