Playing Back Still Images/Video Clips On Tv; Connecting The Digital Video Camera To Hdtv - Hitachi DZ-HV564E Instruction Manual

Playing Back Still Images/Video Clips on TV

You can also playback your images on a TV screen. Before connecting to any
devices, make sure to select NTSC / PAL system to match the video input system of
the TV/video equipment you are going to connect to the digital video camera, then
turn all connected devices off.
1. Connect one end of the AV cable to the AV OUT terminal of the digital video
camera.
2. Connect the other end to the AV input socket of the TV set.
3. Turn the TV and digital video camera on.
4. Playback the still images/video clips.
5. The method of operation is the same as playing back still images and video clips
on the digital video camera.

Connecting the Digital Video Camera to HDTV

HD TV (High Definition Television) is a digital television broadcasting system with bet-
ter resolution than traditional television systems. It can perform HD (720P) high reso-
lution quality.
1. Connect one end of the YPbPr (HD out) cable into the (Video IN) port on the HDTV
and the other end into the HDTV terminal of the digital video camera.
2. Connect one end of the AV cable into the (Audio IN) socket of the HDTV and the
other end into the AV OUT terminal of the digital video camera. (Do not connect
the yellow connector to HDTV's AV-IN.)
3. Turn the TV and digital video camera on.
The video camera will auto detect and set the settings when the cables are
connected.
(white)
A/V OUT
(yellow)(no connection)
<AV cable>
COMPONENT (HD OUT)
HD TV
(green)
Video IN
(blue)
(red)
(red)
Audio IN
(white)
<YPbPr(HD out) cable>
(green)
(blue)
(red)
EN-25