Hitachi DZ-HS301E Instruction Manual page 148

Symptom
It will take some time to
save a video edited on
the video editor of
ImageMixer 3.
"Hardware Removal"
results in error.
No USB HS (high
speed) connection even
when USB2.0 card is
used.
No data can be written
to HDD/DVD/SD
memory card using this
DVD video camera/
recorder.
148
Cause and Correction
If you are editing a video file whose contents are different from
those of project setting, it may take some time, since the entire
video file must be re-encoded. Reconfirm the project setting.
®
Exit Windows once, and then disconnect the DVD video
camera/recorder. If your PC uses Windows
the problem may be solved if you install Windows
later.
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker
in order to operate the USB2.0 card at HS (high speed).
No data can be written to the HDD, disc or SD memory card in
this DVD video camera/recorder when it is connected to PC. To
create a DVD, use the DVD drive of PC that corresponds to each
DVD medium.
®
2000 Professional,
®
2000 SP3 or
Reference
page
—
124
—
116