Table of Contents
Advertisement
If you wish to check the stations press the "
to move the red flashing number and name down to the
programme you wish to view and press the red button
on the remote control hand set to select the programme.
• If you would like to change the order of the table, you
can rearrange it. To rearrange the table, press the
menu button to display the install menu, then in the
install menu select the TUNING menu. To use the
Tuning menu please refer to the Tuning sub menu
section that is located in the install menu part of this
manual.
• After selecting the Tuning Mode if you want to start
APS, by pressing the "
the " Start" item and by pressing "
ton start the APS.
• If you do not want to start APS, you can cancel it by
pressing the "TV" button on your remote control.
• When you start APS the below menu will appear on
the screen.
Operating the button controls on the TV
Setting of the volume level and selection of the program-
me can be done using the controls on the front of the TV.
Volume Setting
• To decrease or increase the volume press either the
''
'' or "
" volume buttons. A volume level
scale will appear on the screen.
Programme Selecting
• The next programme can be selected by pressing
the "P+" or "P-" buttons.
" button
" or "
" buttons, come to
" or "
" but-
Entering Main Menu
• Press "MENU" button to enter main menu. In the
main menu select submenu using "P +" or "P -" but-
ton and enter the submenu using "
button. To learn the usage of the menus, refer to the
Menu System section of this manual.
Operating with the Remote Control
The remote control handset of your TV is designed to
control all it's functions.
These functions will be described along with the menu
system of your TV.
Volume Setting
• Press "
" button to increase volume.
• Press "
" button to decrease volume.
Programme Selecting
(Previous or next programme)
• Press "
" button to select the next programme.
• Press "
" button to select the previous programme.
Programme Selecting (direct access):
To select programmes between 0 and 9 use the num-
bered buttons on the remote control handset
For selection of programmes between 10 and 99 press
the "- -" button. The symbol "- -" will be displayed on the
TV screen. Next press the numbers for the programme
you wish e.g. 2 and 7 for programme number 27.
GB - 10 -
" or "
"
Advertisement
Table of Contents
