Subscribe to Our Youtube Channel
Related Manuals for Eden Valvetech VT-300A
Summary of Contents for Eden Valvetech VT-300A
- Page 1 VT-300A Valvetech All Tube Bass Guitar Amplifier Users Manual EDEN The Standard in Bass Sound Draft Copy: 1-20-2000...
- Page 2 This is a hand crafted amplifier built with modern construction techniques and reliable printed circuits by people who care about sound and quality. Thank you for choosing Eden. Please take the time to read this manual and to send in your warranty card. CAUTION To reduce the risk of electrical shock, do not expose this unit to rain or moisture.
-
Page 3: Front Panel Features
Front Panel Features Input Jacks Designed to accept a standard ¼” mono phone plug. The Passive jack is for use with low output Basses and passive Basses. The active jack is for higher output Basses with active electronics. Overdrive Control This switch shifts the amplifier into an ultra hi gain mode, suitable for a wide range of sound textures from clean to fat and all the way to saturated. - Page 4 Master Level Control This controls the final drive to the amplifier. Use this to control your stage level. About mid point on the control should be normal for most playing situations. Compressor Active light This indicates the activity of the compressor. When the LED lights up the compressor is functioning.
-
Page 5: Tuner Output
Back Panel Features AC Power Inlet This is the main AC connection point. It is an IEC type inlet and also serves as the fuse carrier. Replace the fuse only with the same type and size as the original. FX Loop This loop is located post the tone controls and sit just prior to the amplifier input. - Page 6 949-0444) and we will be happy to help you. Your unit has a two year warranty with the exception of the tubes. The tubes are warranted for 90 days from date of purchase. Eden Electronics Inc. P. O. Box 338 310 first St.
Need help?
Do you have a question about the Valvetech VT-300A and is the answer not in the manual?
Questions and answers