Advertisement
General Specifications
Size
Weight
EIA rack
Power Output
Headroom
Damping Factor
Slew Rate
Rise time
Frequency Response
Distortion THD
Power Requirements
The WT-1000 needs a separate properly grounded 20 Amp circuit @ 120
Volts for correct operation and best sound quality. FOR YOUR SAFETY
DO NOT REMOVE OR MODIFEY THE GROUND ON YOUR POWER
CABLE.
Fuse Requirements
USA @ 120 Volts /60 HZ (12) Amps, 5 x 20 mm GMC/T/slow blow
Europe @ 240 Volts/50 Hz (6) Amps, 5 x 20 mm GMC/T/slow blow
Japan @ 100 Volts/60 Hz (14) Amps, 5 x 20 mm GMC/T/slow blow
Operation and power requirements
For best electrical operation and sound quality this unit should have a
properly grounded, dedicated 20 Amp circuit for itself.
Front Panel Features
The WT-1000 has several unique features. Each channel is equipped with a
volume control, tone shift control, and an output limit level indicator.
3.5" x 19" x 14"
28 Lbs.
2 Space w/ min. clearance
@ 8 ohm x 2 240 Watts RMS
+3dB min.
better than 100 from 20Hz to 1Khz
128V/8us
11us
13Hz to 36KHz +/- 3dB
.06 %
Advertisement
