Kogan HDMI 1080p22 User Manual page 13

Table of Advanced Video Adjustment Settings
Setting
DNR
CTI
Flesh Tone
Adaptive
Luma
Control
Selection of "VGA" (only for VGA)
1. Press the Menu button, and the "Video" menu
appears.
2. Press or Enter to enter the "Video" sub menu
3. Press or to highlight "VGA"
4. Press or Enter to enter the VGA submenu.
Selection of "Auto Adjust"
After entering the "VGA" menu:
1. Press or to highlight "Auto Adjust"
2. Press or Enter to confirm your selection.
3. Press the Menu button to exit the OSD Menu, or
press Exit to make another selection.
Note: This item will auto-adjust the picture display.
Selection of "H. Position", "V. Position", "Phase", "Clock".
After entering the "VGA" menu:
1. Press or to highlight your selection
2. Press or to adjust.
3. Press the Menu button to exit the OSD Menu, or
press Exit to make another selection.
Options
Off, Low, Medium,
Strong, Auto
Off, Low, Medium, Strong
On, Off
On, Off
12
Description
Select to control the sharpness
and noise reduction.
Select to improve the dynamic color level.
Select "On" to correct the flesh
tone automatically.
When this is on, this feature will set
the contrast and brightness levels
for optimum performance.
.