Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Perreaux APV1P
Summary of Contents for Perreaux APV1P
- Page 1 MODEL AVP1/APV1P ® ® DOLBY DIGITAL PROCESSOR/PREAMPLIFIER OWNERS MANUAL...
-
Page 2: Table Of Contents
We have attempted to explain every feature be cleaned with a polish designed for and operational facet clearly and concisely. use on aluminium. Your Perreaux dealer will be happy to assist OWNERS MANUAL if you encounter any unforeseen problems. CONTENTS... -
Page 3: Important Information
AVP1 9. Cleaning wire which coloured correct, maintained When cleaning any Perreaux product GREEN/YELLOW must be connected to throughout the entire system. use lukewarm water with a few drops of the terminal which is marked with the mild detergent. letter... -
Page 4: Front Panel Controls
If you have no surround speakers set qualified Perreaux service agent. Failure to recognise this warning will void any is not the desired source. the mode to Off (no light) warranty. Note: The front speakers cannot be... - Page 5 The adjustable DELAY TIME range L.. and R. and LS and RS LEDs will LARGE light RED from 0 to 5ms for centre channel or light in YELLOW SMALL light GREEN 0 to 15ms for rear channel will be CENT. and SUB.W LEDs will be REAR SPEAKERS shown on the display when it under OFF.
-
Page 6: Rear Panel
This RED LED will light up when the Yellow = Video (composite) Input / Output outputs of an AUXILIARY audio program during playback is PCM device such a TV. digital encoded. AUDIO ANALOG OUTPUTS TAPE AUDIO L and R INPUT Analog signal left and right channel FRONT L and R AUDIO OUTPUT MUTE... - Page 7 S-VIDEO video signal input can be VIDEO 1 COMPOSITED VIDEO INPUT connected to a A/V source S-VIDEO video output such as DVD player. Composite video signal input can be connected to A/V source video VIDEO 3 S-VIDEO INPUT output such as DVD player. S-VIDEO video signal input can be connected to a A/V source S-VIDEO VIDEO 2 COMPOSITED VIDEO...
-
Page 8: Remote Control
AVP1 when chosen listening mode: Digital PERREAUX 29 button full function infrared selected with the CHANNEL button Surround, Pro-Logic or Stereo remote control. to obtain the correct balance for your listening position. Pushing the TONE TEST STANDBY LEVEL - button will cause the level... -
Page 9: On Screen Display (Osd)
HALL LAG 4 At low levels, ensure the system is The Remote control uses 2 internal "AAA" operating correctly and that each input is set HALL SML size batteries and may be changed by for the correct mode and level STADIUM removing the plastic panel forward out of the Press the “UP”... - Page 10 Always ensure your AVP1 The Perreaux AVP1 is equipped with a user MAINS/LINE VOLTAGE disconnected from the mains/line supply serviceable mains/line fuse situated in a if changing the mains/line fuse. small drawer below the mains/line-input It is important that the AVP1 be operated receptacle.
-
Page 11: Specifications
SPECIFICATIONS PERREAUX INDUSTRIES LTD 1 AUDIO INPUT LEVEL / IMPEDANCE RESERVES THE RIGHT TO CHANGE VCR, AUX TAPE and CD SPECIFICATIONS FOR THE 200mV/22K OHM IMPROVEMENT OF THIS PRODUCT 2 DIGITAL AUDIO INPUT LEVEL/IMPEDANCE Designed and Manufactured in VIDE0 1, VIDEO 2, VIDEO 3and MD New Zealand 0.5Vp-p/75 OHM...
Need help?
Do you have a question about the APV1P and is the answer not in the manual?
Questions and answers