Performance Teknique ICBM-1-TOUCH Operating Instructions Manual page 11

Tuner
Listen to the Radio:
Basic Operations:
Change Bands
Press BAND repeatedly until you find needed band.
Touch current band area to change the band.
The following bands will be displayed in turn: FM1--FM2---AM
Use the Preset Radio Stations
Select with number keys on the remote controller
Directly touch the memory radio stations
Fine Frequency Adjustment
Use menu adjusting keys on the remote controller
Directly touch fine adjustment area on the screen
Fine
Current
Adjustment-
Band
TUNER
BAND FM1 08
0: 87.00MHz
1: 88.00MHz
2: 89.00MHz ASM
3: 90.00MHz
4: 92.00MHz
Automatic Seeking
Semi-automatic Seeking
Preset channels
Fine
Current
Adjustment+
Frequency
08
89.30MHz
5: 94.00MHz
6: 96.00MHz
7: 98.00MHz
8:100.00MHz
9:108.00MHz
Preset channels
Tuner
Advanced Function Operations
1 Semi-automatic Seeking
Press menu adjusting keys on remote controller for 2 seconds or touch
the semi-automatic seeking area on the screen, the system will begin to
seek proper frequency. Current frequency will be displayed.
2 Automatic Seeking
Press BAND button for about 2 seconds or touch the Automatic Seek
-ing area on the screen(ASM),the system will seek channels automatically
starting from 87Mhz until the memorizer is full(20 channels)or reaches
the highest frequency of 108MHz.
3 Manual Storage
Press SET(or ENTER on the remote)when the best frequency is found
and current frequency display will glitter.Select storage location with
CH+,CH- and then press SET(or ENTER) to store it.
Touch current frequency, it will glitter and the color turns to RED. Touch
and select storage location, then touch current frequency, it will stop glittering
and be stored.
Precautions:
1 Press any key to stop auto seeking.
2 This machine can preset 30 chnnels,10 for Fm1 and Fm2 respectively.
3 Automatic seeking is valid only for FM.
4 During manual storage, no other key operation is permitted when the
display content is glittering.
18
17