Hitachi RAK35NH4 Instruction Manual page 13

Indoor/outdoor unit
Hide thumbs Also See for RAK35NH4:
Table of Contents

Advertisement

3
2
Press the
TIMER control button.
(TIME) button.
AM
PM
2
Set the turn-off time with the
TIMER control button.
PM
2
Set the turn-on time with the
TIMER control button.
AM
4
Set the turn-on time with the
TIMER control button.
PM
AM
The timer may be used in three ways: off-timer, on-timer, and ON/OFF (OFF/ON)-timer. Set
the current time at first because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press
the
(RESERVE) button in order to use the same settings next time.
Set the current time with the
PM
Example: The current time is 1:30 p.m.
3
Point the signal window of the remote controller toward the indoor unit, and
press the
(RESERVE) button.
The
(OFF) mark starts lighting instead of flashing and the sign
lights. A beep occurs and the
3
Point the signal window of the remote controller toward the indoor unit, and
press the
(RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
5
Point the signal window of the remote controller toward the indoor unit, and
press the
(RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
4
Press the
The time indication starts lighting
instead of flashing.
(TIMER) lamp lights on the indoor unit.
PM
The setting of turn-off time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will automatically turn on earlier so that the preset
AM
temperature can be reached at 7:00 a.m.
The setting of the turn-on time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
PM
The device will turn off at 10:30 p.m. and then automatically
turn on earlier so that the preset temperature can be reached
at 7:00 a.m.
The settings of the turn-on/off times are now complete.
AM
– 12 –
(TIME) button again.
The time indication will disappear
automatically in 10 second.
PM
To check the current time setting,
press the
The setting of the current time is
now complete.
Example: The device will turn off at 11:00p.m.
(RESERVED) sign
(RESERVED) sign
(TIME) button twice.
(RESERVED)

Advertisement

Table of Contents
loading

Table of Contents