MTD 19A30002000 Operator's Manual page 15

Note: For the chute elbow to be properly installed, the
bottom edge must fall over the bottom of the deck
opening. See Fig. 4-22.
Figure 4-22
12. Secure the chute elbow to the tractor's deck by hooking
the chute strap onto the ball pin installed earlier on the
deck. See Fig. 4-23.
Figure 4-23
13. Install the chute adapter onto the chute elbow by lining up
the tabs and sliding the adapter over the chute elbow, as
in Fig. 4-24. Secure the chute adapter by installing the two
ratchet clips included in the hardware pack in the holes
provided.
Figure 4-24
14. With the bagger cover open, install the upper chute over
the chute adapter, and rest the top so that the chute
support sits in the upper chute groove. See Fig. 4-25.
Note: Make sure to align the upper chute with the ridges
on the bagger support bracket.
Figure 4-25
s
ectiOn
4 — a & i
sseMbly nstallatiOn
15