Download
Share
Print this page
MTD 19A70043OEM Operator's Manual
  1. Manuals
  2. Brands
  3. MTD Manuals
  4. Lawn Mower Accessories
  5. 19A70043OEM
  6. Operator's manual

MTD 19A70043OEM Operator's Manual

Twin rear bagger
Hide thumbs

Advertisement

Quick Links

Download this manual
O
'
M
peratOr
s
anual
Twin Rear Bagger — Model No. 19A70043OEM
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Form No. 769-10572
(January 20, 2015)

Advertisement

loading
Need help?

Need help?

Do you have a question about the 19A70043OEM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MTD 19A70043OEM

Summary of Contents for MTD 19A70043OEM

  • Page 1 ’ peratOr anual Twin Rear Bagger — Model No. 19A70043OEM WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No.

  • Page 2: Table Of Contents

    Choose from the options below: ◊ Visit us on the web at www.mtdproducts.com ◊ Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683 ◊ Write us at MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...

  • Page 3: Safe Operation Practices

    Important Safe Operation Practices WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
  • Page 4 General Service Use slow speed. Choose a low enough speed setting so that you will not have to stop or shift while on the slope. Before cleaning, repairing, or inspecting, make certain the Tires may lose traction on slopes even though the brakes blade(s) and all moving parts have stopped.
  • Page 5 2 — i ection mportant peration racticeS...

  • Page 6: Carton Contents & Hardware Packs

    Contents of Carton Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below and shown in Fig. 3-1. The four hardware packs included in this kit are detailed on this and the following page. •...
  • Page 7 CONTENTS OF HARDWARE PACK This grass collector kit is shipped with three loose hardware packs enclosed and one set of hardware packed with the upright mounting bracket. Please check your hardware packs against the illustrations below. The quantities for each item is listed in parenthesis. 3 —...

  • Page 8: Assembly & Installation

    Assembly & Installation NOTE: References to left, right, front and rear of the tractor are from the operator’s position, unless otherwise stated. • Before assembly, place the tractor on a firm, level surface, disengage the PTO, stop the tractor engine and set the parking brake.
  • Page 9 Secure the upright support bracket to the mounting Snap the plastic upper chute support in place by first assembly in the mounting hole available for the deck size clipping the side portion onto the bagger support rail (1) this bagger is being installed on. See Figure 4-4 for the with the edge of the snap feature aligned with the line on proper mounting location.
  • Page 10 Clip in the other side of the screen by flexing the screen and pushing it down into the other corresponding cutout hole. See Figure 4-8. Figure 4-10 Make sure screen sits under the cover’s lip Figure 4-8 Install the bagger cover onto the bag support assembly, as seen in Figure 4-9.
  • Page 11 Note: Be careful not to cover any holes on the upper chute Install both bag assemblies onto the bag support brackets by inserting the front edge in first, as seen in 1 of Figure tube when applying the self -adhesive foam strip. 4-13, and setting the back edge down until it fits into the Apply a wide adhesive rubber strip, included in hardware assembly (2).
  • Page 12 Installing the Discharge Chute Secure the flexible hose extension to the upper chute assembly using the (726-05019) hose clamp included in When installing the discharge chute, two different installation hardware pack 689-00342. instructions exist. For the 54” Fabricated deck units, the discharge chute elbow mounts directly onto the cutting deck.
  • Page 13 Secure the discharge chute elbow to the cutting deck using a (720-04122) wing knob included with the bagger kit. Refer to Figure 4-20. Figure 4-22 Pivot the discharge chute rearward until the hole in the discharge chute elbow aligns with the pin on the deck Figure 4-20 adapter.
  • Page 14 Install The Counter Weight Install the upper chute tube onto the discharge chute elbow as shown in Figure 4-24. The front weight kit is designed for use with all RZT-L (Lap Bar) Residential Zero-turn models. The front weight kit is NOT designed nor required for use with all RZT-S (Steering Wheel) Residential Zero-turn models.
  • Page 15 Attach the weight bar assembly to the front axle with a 3 1⁄4-inch (710-3056) screw and (712-04063) flange nut from hardware pack 689-00325 on the left side. Repeat on the right side. Do not fully tighten at this time. See Figure 4-27. Figure 4-27 Visually center the weight bar assembly on the tractor and tighten the hardware installed in step 2 to secure the...

  • Page 16: Operation

    Operation Bagger Usage Empty the grass clippings at a proper disposal site, use the handle at the bottom of each grass bag. Holding the bag NOTE: When both grass bags are full, place the tractor on a firm, firmly, empty the contents level surface, disengage the PTO, turn the tractor engine off and Replace grass bags, close lid, flip down seat, restart your set the parking brake.
  • Page 17 This page intentionally left blank.

  • Page 18: Parts List

    Parts List...
  • Page 19 19A70043OEM Parts List Ref. Part Number Description 931-05071 Upper Chute Assembly 931-04292 Twin Bagger Cover 731-06497 Upper Chute Support 731-06504 Bagger Cover Screen 710-0276 Carriage Screw, 5/16-18 x 1.00” 710-0376 Hex Head Screw, 5/16-18 x .75” 911-0310 Clevis Pin, .50” Dia. x .78 Lg.

  • Page 20: Warranty

    MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with Routine maintenance items such as lubricants, filters, blade respect to new merchandise purchased and used in the United sharpening, tune-ups, brake adjustments, clutch adjustments,...