Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Outback Guidance OUTBACK S DOM-OBK01
Summary of Contents for Outback Guidance OUTBACK S DOM-OBK01
- Page 1 OUTBACK S OWNER’S MANUAL December, 2005 DOM-OBK01 Rev. D...
-
Page 2: Table Of Contents
Introduction ....... .1 Congratulations on your purchase of an Outback S Installation . - Page 3 3. Determine Display Location: Normally, the dis- play is located above and behind the center of the steering wheel just below the driver's line of sight. The easiest installation is on the front glass of the cab. If that's not possible, it can vacuum mount to any non porous (metal) surface or the vacuum mount can be removed and the bracket mounted with bolts.
-
Page 4: Power Up
POWER UP SETUP 1. Turn Unit On, After Starting Engine: Toggle the Using the Menu: To access the menu, press the MENU power switch located on the right end of the display. button. Choose the item you want using the up and >... -
Page 5: Contour Guidance
4. Making A New First Pass: Let's say you've made CONTOUR GUIDANCE several passes and then want to start a new line that doesn't follow the last one. Simply drive where you 1. Background: Choose contour guidance whenever want to go. Once it becomes obvious that you're not you want to follow previous passes. -
Page 6: Headland Presence
4. Switching Modes: You may switch between HEADLAND PRESENCE straight and contour modes at will. When switching to straight mode for the second time, you are given the The headland presence indicators display anytime that option of using the previous A=B line or setting a new the antenna crosses into a previously applied area. -
Page 7: Stop Guidance
CONTOUR & STRAIGHT GUIDANCE SUMMARY Item CONTOUR MODE STRAIGHT MODE Mode of Operation Freestyle. Guide relative to any previous pass. Predefined straight parallel and numbered passes. Work Recorded In Memory Yes. In fact, the recorded pass defines where the next Yes. -
Page 8: Using E-Dif
Stop Guidance and Resuming at a Future Time: USING e-Dif CORRECTION Any time the operator needs to suspend field applica- tion, whether for an hour or days, the following proce- The patented e-Dif™ correction method uses only the dure will allow guidance to be resumed without inter- standard GPS satellites and does not require an exter- ruption. -
Page 9: Diagnostics
DIAGNOSTICS This section provides helpful information for operating or troubleshooting the unit. Item Description SATS: TRK=00 Tells the number of satellites currently visible in the sky. This is only USE IN CALC=00 GPS satellites and does not include the correction satellites. CORRECTION TYPE Displays the type of differential correction being used. - Page 10 and exterior housing. If you measure ±5 VDC at the SECTION 1 - TESTING ANTENNA VOLTAGE console connector, but not at the end of the coaxial The Outback antenna is an "Active" antenna that cable, then the cable is damaged. Replace the coaxial requires power to operate.
-
Page 11: Frequently Asked Questions
lel in Canada. WAAS is not available currently any- FREQUENTLY ASKED where else in the world. For more information about QUESTIONS WAAS contact the FAA at http://gps.faa.gov/Programs/WAAS/waas.htm. ABOUT GPS GUIDANCE Q: What is GPS? Q: What is L-BAND? A: GPS stands for Global Positioning System. It's a A: L-BAND is a satellite based correction signal oper- satellite based signal operated by the Department of ated by OmniStar. - Page 12 A: To erase the memory in the Outback S , first press Q: How do I perform headlands? the STOP GUIDANCE button. Next, press the down A: This is very easy. Usually headlands are performed arrow to place the pointer next to ERASE MEMORY. in contour mode.
-
Page 13: Contacting The Factory
CONTACTING THE E-MAIL: 24 hours / 7 days a week, your inquiry will receive a FACTORY response from one of our Customer Support Representatives within one business day. U.S: Canada: Sales: outbacksales@outbackguidance.com Outback Guidance Outback Canada Customer Service: outbackcs@outbackguidance.com Hemisphere GPS, L.L.C. Hemisphere GPS, L.L.C. - Page 14 parts added to an Outback S™ system after the system LIMITED OUTBACK S is shipped from OUTBACK, accessories or parts that ONE-YEAR WARRANTY are not installed in the OUTBACK factory. Hemisphere GPS, L.L.C. ("OUTBACK") manufactures OUTBACK will repair or replace product(s) covered its hardware products from parts and components that under this limited warranty that are returned to the are in accordance with industry standard practices.
- Page 15 authorized by OUTBACK, usage not in accordance LIMITED OUTBACK S with product instructions, failure to perform required EXTENDED SERVICE preventive maintenance and problems caused by use of PLAN parts and components not supplied by OUTBACK. This limited plan does not cover any items that are in The Outback S™...
-
Page 16: Parts Listing
PARTS LISTING Outback S Guidance System REF. DESCRIPTION QTY. Antenna Assembly, see page 31 AB443 Plate, Antenna Mounting w/Double Sided Tape 60054 Antenna Cable, OBK-S - 20ft Lg Console Assembly, see page 30 60055 Power Cable, OBK-S - 15ft Lg, Cig Lighter Plug TS-7R Tie Strap, 7"... - Page 17 Antenna Mounting Details REF. DESCRIPTION QTY. AB444 Antenna, OBK-S w/Labels - Replacement 60052 Antenna, Mounting Kit - Generic 60085 Magnet, Antenna Mount - Replacement NOTES...
- Page 18 Outback Guidance Supplemental Instructions for Version 4.06 Software ALTERNATE DISPLAY SCREENS While operating in contour or straight guidance modes, the up and down arrow keys will present alternate display screens. Repeated pressing of the down arrow will display the following screens. 0.
Need help?
Do you have a question about the OUTBACK S DOM-OBK01 and is the answer not in the manual?
Questions and answers