1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Lawn Mower
  5. 917.270930
  6. Owner's manual

Craftsman 917.270930 Owner's Manual

20.0 hp electric start 42" mower 6 speed transaxle1
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
JCRAFTSMAN" I
20.0 HP
ELECTRIC
START
42" MOWER
6 SPEED TRANSAXLE1
LAWN TRACTOR
Model No.
917.270930
• Safety
• Assembly
• Operation
• Maintenance
• Repair Parts
CAUTION:
Read and follow all
Safety Rules and Instructions
before operating this equip-
ment.
For answers to your questions
about this product, Call:
1-800-659-5917
Sears Craftsman
Help Line
5 am - 5 pro, Mon- Sat
Seam, Roebuck and Co., Hoffman Estates, IL 60179
Visit our craftsman wabsite: www.sears.com/craftsman

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 917.270930

Summary of Contents for Craftsman 917.270930

  • Page 1 Call: Read and follow all 1-800-659-5917 Safety Rules and Instructions Sears Craftsman Help Line before operating this equip- 5 am - 5 pro, Mon- Sat ment. Seam, Roebuck and Co., Hoffman Estates, IL 60179 Visit our craftsman wabsite: www.sears.com/craftsman...
  • Page 2 Sears will replace the battery at no charge. Warranty service is available free of charge by taking your Craftsman riding equipment to your nearest Sears Service C_enter.
  • Page 3 SLOPE OPERATION IMPORTANT: This cutting machine is capable of amputating hands and feet and Slopes are a major factor related to loss- of-control and tipover accidents, which can throwing objects. Failure to observe the following safety instructions could result in result in severe injury or death.
  • Page 4 • Keep children out of the mowing area Never run a machine inside a closed and under the watchful care of another area. responsible adult. Keep nuts and bolts, especially blade • Be alert and turn machine off if children attachment bolts, tight and keep enter the area.
  • Page 5 _l, Look for this symbol to point out ACAUTION" Tow only the attachments important safety precautions. It means that are recommended by and comply with CAUTION!!! BECOME AWARE!!! YOUR specifications of the manufacturer of your SAFETY IS INVOLVED. tractor. Use common sense when towing. _CAUTION: In order to prevent acciden- Operate only at the lowest possible speed...
  • Page 6 Steering Wheel (1) Hex Bolt Steering 3/8-16 x 1 Wheel Insert (1) Large Flat Washer (1) Locknut 5/16-18 (1) Hex Bolt 5/16-18 x 1-1/4 (1) Lockwasher 3/8 Steering Extension Steering Wheel Shaft Steering Adapter Boot Seat (1) Washer (1) Shoulder 17/32 x 1-3/16 x 12 Gauge Bolt 5/16-18 _(1)
  • Page 7 Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
  • Page 8 TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) Label • Press lift lever plunger and raise attachment tiff lever to its highest position. • Release parking brake by depressing clutch/brake pedal. • Place gearshift lever in neutral (N) position.
  • Page 9 CHECK BRAKE SYSTEM • Hook rear latch into hole on back of mower deck. After you learn how to operate your tractor, ACAUTION: Do not remove deflector check to see that the brake is properly shield from mower. Raise and hold shield adjusted.
  • Page 10 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATFERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ENGINE OIL PRESSURE FUEL CHOKE MOWER HEIGHT PARKING BRAKE UNLOCKED MOWER LIFT LOCKED ATTACHMENT REVERSE...
  • Page 11 KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Attachment Light Clutch Lever Ignition Switch Ammeter...
  • Page 12 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing adjustments or repairs. We recommend a wide vision safety mask over spectacles, or standard safety glasses.
  • Page 13 TO OPERATE MOWER TO ADJUST MOWER CUTTING HEIGHT Your tractor is equipped with an operator The position of the attachment lift lever presence sensing switch. Any attempt by the operator to leave the seat with the determines the cutting height. engine running and the attachment clutch •...
  • Page 14 ADD GASOLINE TO TRANSPORT • Raise attachment lift to highest position • Fill fuel tank. Use fresh, clean, regular with attachment lift control. unleaded gasoline with a minimum of 1 octane. (Use of leaded gasoline will • When pushing or towing your tractor, be increase carbon and lead oxide depos sure gearshift lever is in neutral (N) and reduce valve life).
  • Page 15 TO START ENGINE COLD WEATHER STARTING (50 ° FAND BELOW) When starting the engine for the first time or if the engine has run out of fuel, it will • When engine starts, slowly push choke take extra cranking time to move fuel from control in until the engine begins to run the tank to the engine.
  • Page 16 MOWING TIPS MULCHING MOWING TIPS • Mower should be properly leveled for IMPORTANT: For best performance, keel: best mowing performance. See "TO mower housing free of built-up grass and LEVEL MOWER HOUSING" in the trash. Clean after each use. Service and Adjustments section of this •...
  • Page 17 AS YOU COMPLETE _O'; SERVICE DATES REGULAR SERVICE Check Tire PreSSure Check Operator Presence and Interlock Systems Check for Loose Fasteners : Lubrication Chart Shat_oerdRep_ace Check Battery Level Mower Blades Clean Battery and Terminals Check Transaxle Cooling Adjust Blade Bolt(s) Tension Adjust Motion Drive Belt(s) Tension Check Engine Oil Level Change EngineOil...
  • Page 18 TRACTOR IMPORTANT: To ensure proper assembly, center hole isn blade must align with star Always observe safety rules when on mandrel assembly. performing any maintenance. • Reassemble hex bolt, lock washer and BRAKE OPERATION fiat washer in exact order as shown. If tractor requires more than six (6) feet •...
  • Page 19 BATTERY NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in Your tractor has a battery charging system which is sufficient for normal use. How- cold weather, these multi-viscosity oils will result in increased oil consumption when ever, periodic charging of the battery with used above 32°F.
  • Page 20 ENGINE COOLING FINS IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean Remove any dust, dirt or oil from engine the cartridge. They may cause deteriora- cooling fins to prevent engine damage tion of the cartridge. Do not oil cartridge. from overheating.
  • Page 21 CLEANING We do not recommend using a garden hose to clean your tractor unless the • Clean engine, battery, seat, finish, etc. electrical system, muffler, air filter and of all foreign matter. carburetor are covered to keep water out. • Keep finished surfaces and wheels free Water in engine can result in a shortened of all gasoline, oil, etc.
  • Page 22 TO LEVEL MOWER HOUSING • Before making any necessary adjust- ments, check that both front links are Adjust the mower while tractor is parked equal in length. Both links should be on level ground or driveway. Make sure approximately 10-3/8". tires are properly inflated (See "PROD- UCT SPECIFICATIONS"...
  • Page 23 BELTINSTALLATION TO REPLACE MOTION DRIVE BELT • Install new belt in reverse order of Park the tractor on level surface. Engage removal. parking brake. For assistance, there is a • Make sure belt is in all pulley grooves belt installation guide decal on bottom and inside all belt guides.
  • Page 24 Gearshift Lever Neutral TO START ENGINE WITH A WEAK Lock Gate BATTERY •.CAUTION: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. Adjustment If your battery is too weak to start the Bolt engine, it should be recharged.
  • Page 25 TO REPLACE FUSE REPLACING BATTERY Replace with 15 amp automotive-type _CAUTION: Do not short battery plug-in fuse. The fuse holder is located terminals by allowing a wrench or any behind the dash. other object to contact both terminals at the same time. Before connecting battery, TO REMOVE HOOD AND GRILL remove metal bracelets, wristwatch...
  • Page 26 TO ADJUST CHOKE CONTROL FINAL SETTING The choke control has been preset at the • Start engine and allow to warm for five factory and adjustment should not be minutes. Make final adjustments with necessary. Check adjustment as de- engine running and shift/motion control scribed below before loosening cable.
  • Page 27 Immediately prepare your tractor for blended fuels (called gasohol or using storage at the end of the season or if the ethanol or methanol) can attract moisture tractor will not be used for 30 days or which leads to separation and formation more.
  • Page 28 TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Willnotstart • Out of fuel. • Fill fuel tank. • See "TO START ENGINE" in • Engine not"CHOKED" properly. Operation section. • Wait several minutes before • Engine flooded. attempting to start. • Bad spark plug. •...
  • Page 29 TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Engine clicks but i • Loose or damaged wiring. • Check all wiring. will not start _• Faulty solenoid or starter. • Check/replace solenoid or (cont'd) starter. Loss of power • Cutting too much grass/ •...
  • Page 30 TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Poor cut - uneven • Clogged mower deck vent • Clean around mandrels to (cont'd) holes from buildup of open vent holes. grass, leaves, and trash around mandrels. Mower blades will • Obstruction in clutch •...
  • Page 31 SCHEMATIC BA'I-rERY "ED FUSE AMMETER (OPTIONAL) STARTER au,oc w.,T. ,'©' ..SOLENOID CLUTCH/BRAKE (PEDAL WNITE IGNITION ..(NOT OCCUPIED) SWITCH WHIT E SEAT SWITCH BLACK © BLACK BLACK GROUNDING BUICK (CLUTCH OFF) CONNECTOR (OPTIONAL) SPARK • BUicK (_ IGNITION • PLUG EUEL_ UNIT...
  • Page 32 TRACTOR - MODEL NUMBER 917.270930 ELECTRICAL 16 I...
  • Page 33 Cable Battery 166180 Fuse 73510400 Nut Keps Hex 1/4-20 Unc 145491 Cable Ground 121305X Switch Seat 163968 Switch Ign 140403 Key Molded Craftsman 170217 Harness Ign 71110408 BoltBIk. FinHex 1/4-20Uncx1/2 131563 Cover Terminal 145673 Solenoid 121433X Ammeter Rectangular 6 Amp...
  • Page 34 TRACTOR - MODEL NUMBER 917.270930 CHASSIS AND ENCLOSURES...
  • Page 35 I rt/-t_, I url -- IVlUUr..I- NUMUt'H _]/',;_/U_JU :HASSIS AND ENCLOSURES KEY PART NO, NO. DESCRIPTION 169830 Chassis Assembly Drawbar 169061 17060612 Screw 3/8-16 x 3/4 155272 Bumper Hood/Dash 166337X013 Dash STD533710 Bolt, Carriage 3/8-16 x 1 155927 Panel, Dash, L.H. 145660 Clip Tinnerman Gdl{e P/L 172107X010...
  • Page 36 TRACTOR - MODEL NUMBER 917.270930 GROUND DRIVE • 48 •...
  • Page 37 I HP,_ IUH -- MUUI¢L NUMHp..H 917.270930 GROUND DRIVE KEY PART KEY PART DESCRIPTION DESCRIPTION Cover, Pedal ..Transaxle (See Breakdown) 8883R Peerless 206-545C 140186 Pulley, Engine Bolt, Hex 7/16-20 x 4 Grade 5 146682 Spring, Return, Brake 71170764 Washer 123666X Pulley, Transaxle STD551143...
  • Page 38 I I'i/-_l.p I Url NIUUI=I. NUMI31=M _ I I.'_IU_JU STEERING !-t:!
  • Page 39 TRACTOR - MODEL NUMBER 917.270930 _TEERING KEY PART DESCRIPTION 139768 Steering Wheel 154427 Axle AssemblySTMP DroppedSTL 169840 Spindle Assembly,L.H. 169839 Spindle Assembly, R.H. 6266H Bearing, Race, Thrust, Hardened 121748X Washer 25/32 x 1-5/8 x 16 Gauge 19272016 Washer 27/32 x 1-1/4 x 16 Gauge 12000029 Ring, Klip 3366R...
  • Page 40 TRACTOR - MODEL NUMBER 917.270930 ENGINE _"'_ OPTIONAL EQUIPMENT Spark Arrester...
  • Page 41 TRACTOR - MODEL NUMBER 917.270930 -'NGINE PART DESCRIPTION 162152 Control, Throt Paddle 32 22 17720410 Screw, Hex Thd Cut 1/4-20 x 5/8 Engine, B&S, (See Breakdown) No. 461707-0145-E3 149723 Muffler Exhaust 144069 Exhaust Asm. Left 144068 Exhaust Asm. Right 138129 Clamp Tube Double Engine 150176 Bolt 5/16-18unc x 3/4 W/Sems...
  • Page 42 SEAT ASSEMBLY • • "% PART PART DESCRIPTION DESCRIPTION 140123 Seat 3350 BIk/blk Craftsman 121248x Bushing Snap BIk Nyl 50 Id 140551 Bracket Pnt Pivot Seat (blk) 72050412 Bolt Rdhd Sht Nk !/4-20x1-1/2 71110616 Bolt Fin Hex 3/6-16unc X 1...
  • Page 43 Decal, LiftHandle 163257 Decal, Panel Dash B&S Pad FootrestLH STLT 165800X428 171808 Decal, Rplcmnt Pad Footrest RH STLT 165799X428 163204 Decal, Fender, Craftsman 174495 Owner'sManual, English 156368 Decal, Fender STLT Oper Inst E/S 174496 Owner'sManual, Spanish KEY PART WHEELS AND TIRES...
  • Page 44 I li-I/"S,_ I _4,Jl'i IVI_,$ULT, L,. ilUIVII_F=rl ,,_1 U,,,_,vlPU LIFT ASSEMBLY...
  • Page 45 TRACTOR -- MODEL NUMBER 917.270930 JFT ASSEMBLY PART DESCRIPTION 159460 Lift Lever Inner Wire Assembly 159471 Shaft Assembry, Lift 105767X Pin, Groove 12000002 E-Ring 19211621 Washer 21/32 x 1 x21 Gauge 120183X Bearing, Nylon 125631X Grip, Handle, Fluted 122365X Button, Plunger, Red 139865 Link, Lift, L.H.

  • Page 46: Mower Deck

    TRACTOR - MODEL NUMBER 917.270930 MOWER DECK i147 142 >21 °1...
  • Page 47 TRACTOR -- MODEL NUMBER 917.270930 MOWER DECK KEY PART KEY PART DESCRIPTION DESCRIPTION 165892 Mower Deck Assembly, 42" 149846 Knob Custom Oval STD533107 Bolt 144959 V-Belt 138017 Bracket Assembly,Sway Bar, STD541437 Front 101 136420 Mulcher Cover 165460 Bracket Sway Bar 38/42" Deck 102 71161010 Screw STD624008...
  • Page 48 TRACTOR - MODEL NUMBER 917.270930 PEERLESS TRANSAXLE--MODEL NUMBER 206-545C 70 6A MODEL and...
  • Page 49 TRACTOR -- MODEL NUMBER 917.270930 EERLESS TRANSAXLE--MODEL NUMBER 206-545C _EY PART KEY PART IO. NO. DESCRIPTION NO. NO. DESCRIPTION 772147 Transaxle Cover 786026 Dowel Pin 780086A Needle Beadng 5/8" 792076A Flat Washer 770128 Transaxle Case .312 ID x .059W 776395 Countershaft 790079 Brake Lever...
  • Page 50 TRACTOR - MODEL NUMBER 917.270930 BRIGGS & STRATrON ENGINE-MODEL NUMBER 461707, TYPE NUMBER 0145-E3 8811 41 _ I_-"_-_ 523 I 1125 '_ 1081 o 552A 404 o 1095 VALVE OVERHAUL GASKET 74;_ 220 !_L 11019 LABEL 11058 OWNER'S MANUAL 1132 REQUIRES SPECIAL TOOLS TO INSTALL.
  • Page 51 TRACTOR -- MODEL NUMBER 917.270930 BRIGGS & STRATTON ENGINE-MODEL NUMBER 461707, TYPE NUMBER 0145-E3 861 PUMP REPAIR KIT 392_ 432_ 386!_ ik REQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR tNSTRUCTtON MANUAL. 1036 LABEL KIT-EMISSION...
  • Page 52 TRACTOR - MODEL NUMBER 917.270930 BRIGGS & STRATTON ENGINE-MODELNUMBER 461707,TYPE NUMBER0145-E3 3o91 lo,ol 1051 797A 358 GASKET 634 _ 177 O 51A_(_\ 163 _ 3_ 20@...
  • Page 53 TRACTOR -- MODEL NUMBER 917.270930 tRIGGS & STRATTON ENGINE-MODEL NUMBER 461707, TYPE NUMBER 0145-E3 PART KEY PART DESCRIPTION DESCRIPTION 498583 Cylinder Assembly 399265 Bushing/Seal Kit 690718 Screw (Throttle Valve) 391086 Seal-Oil 693485 Shaft-Throttle 493304 Sump-Engine 807923 Kit-Idle Speed 693509 • Gasket-Carburetor Body 691162...
  • Page 54 TRACTOR -- MODEL NUMBER 917.270930 BRIGGS & STRATrON ENGINE-MODEL NUMBER 461707, TYPE NUMBER 0145-E3 PART PART DESCRIPTION DESCRIPTION Nut (Starter Terminal) 94930 Screw (Cylinder ShieLd) 797A 693167 Motor-Starter 394860 Cap-Drive 497596 Cap-End Bolt (Starter Motor) 497607 690323 Brush Set 691427 Housing-Starter 497608 •...
  • Page 55 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, "" NOT ACROSS HILL SIGHTING IIDE SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE. 15 ° MAX. Operate your Tractor up and down the face of slopes (not greater than 15°), never across...
  • Page 56 i¸ i For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME SM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts &...

Table of Contents