Advertisement
ASSEMBLY INSTRUCTIONS
Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a nonabrasive
surface. If you have any questions, please call our Customer Service Center at 866-538-7735, (fax: 952-946-0031),
Monday-Friday, 9:00 a.m.-5:00 p.m. CST, e-mail: custserv@homecasual.net or visit our website at www.homecasual.net.
Step 1: Turn the table leg upside down. Attach the leg connector bracket to the table leg by inserting bolt and metal washer.
Using the Allen wrench, tighten all bolts completely and cover them with plastic bolt caps.
Step 2: Place the table top frame on a flat, soft surface. Align the table legs with table frame by inserting bolt and metal
washer into the pre-drilled holes on table frame and legs. Tighten all bolts completely and cover them with
plastic bolt caps.
Step 3: Turn the table into the upright position. Place the table top in the table frame.
Your table is now ready for use.
IMPORTANT: To avoid damage to your table:
- Before storing, drain all water that may have accumulated in or around patio furniture
frames. If not drained properly, water can cause freeze damage.
- When storing patio furniture, do not stack anything on glass, stone, or marble tabletops.
- A patio furniture cover is also recommended.
- For safety reasons, do not sit or stand on the table.
Please refer to part numbers when reordering
For questions or comments about product:
Email: custserv@homecasual.net or Call t oll-free: 866-538-7735
Made in /Hecho en CHINA for Kmart Corporation, Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
SHOP kmart.com
3/3
fig. 1
Advertisement
