LG LHB535 Owner's Manual page 25

Installation 25
Wired Network Setup
Before setting the wired network, you need to
connect tile broadband intemet to your home
network.
If there is a DHCPserveron tile local area
network (LAN)via wired connection, this player
will automatically be allocated an IPaddress.
After making tile physical connection, a small
number of home networks may require the
player's network setting to be adjusted. Adjust
tile [NETWORK]setting asfollow.
1. Select [Corlrlection Setting] option in tile
[Setup] menu then pressENTER.
2. Tile [Connection Setting] menu appear on
the screen. UseA/V to select tile [Wired]
and pressENTER.
4. Use A/V/</> to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
addressautomatically.
5. Select [OK] and press ENTER to apply
network settings.
6. Tile player will askyou to test tile network
connection. Select [OK] and press ENTER to
corn plete tile network con nection.
7
F
o
D
3. Selects [Yes]and press ENTER to continue.
The new connection setting resetsthe
current network settings.
HB905SB-AD.BUSALL_OM.indd 25 2010-01-08 &AALi 11:48:_