Starting The Programme - AEG LAVAMAT 1046 EL Instruction Booklet

132986190.qxd 16/02/2005
How to wash

Starting the programme

1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the
programme will start at the end of the count-
down.
If the DOOR light
it goes out the END
appears in the display, it indicates that the door is open. Close the
door and press the START/PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to cancel the delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Cancel the delay time: press the START/PAUSE button. Press the
DELAY START button
START/ PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the pro-
gramme come on. After the machine has started, only
the running phase pilot light stays on.
Display
The time to the end of the programme decreases minute by minute and
appears on the display.
24
11:56 Pagina 24
is red and flashing for some seconds and when
light starts flashing, the alarm code E40
until 0' appears on the display. Press the