Inside; Outside - GE PEB1590 Owner's Manual

Care and cleaning of the oven.
Helpful Hints
An occasional thorough wiping with a solution oI baking soda and water keeps
the inside fl'esh.
Unplug the cord before cleaning any part of this oven.
How to Clean the Inside
Walls, Floor,Inside Window, Metal and Plastic Parts on the Door
Some spatte_ can be removed with a paper towel, othe_ may require a damp cloth.
Remove greasy spatte_ with a sudsy cloth, then rinse with a damp cloth. Do not use
abrasive cleane_ or shaq) utensils on oven walls.
To clean the surface of the door and the surface of the oven that come together upon
closing, use only mild, non-abrasive soaps or detergents using a sponge or soft cloth.
Rinse with a damp cloth and dry.
Never use a commercial oven cleaner on any part of your microwave.
Removable Turntable and Turntable Support
To prexent breakage, do not place the tm'ntable into water just after cooking. V_sh it
carefifllv in warn/ suds_ water or in the dishwasher The tm'ntable and support can be
broken if dropped. Remember, do not operate the oxen xdthout the tm'ntable and
support in place.
How to Clean the Outside
Do not use cleaners containing ammonia or alcohol on the microwave oven. Ammonia or
alcohol can damage the appearance of the microwave.
Case
Clean the outside _ff the microwave with a sudsy doth. Rinse with a damp cloth and then
dry: _._]pe the window clean with a damp cloth.
ControlPanel and Door
X._]pe with a damp cloth. D_y thoroughly. Do not use cleaning sprays, lmge amtmnts _ff
soap and water; abrasives or sharp objects on the panel--they can damage it. Some paper
towels can also scratch the control panel,
Door Surface
It is important to kee I) the area clean where the door seals against the microwave. Use only
mild, non-abrasive detergents applied with a clean sponge or soft cloth. Rinse well.
Power Cord
If the cord becomes soiled, m_plug and wash Mth a damp cloth. For stubborn spots, sudsv
water may be used, but be certain to rinse with a damp cloth and dry thoroughly befln'e
plugging cord into Otlflet.
24