Service And Adjustments; To Remove Mower; To Install Mower - Craftsman 917.271851 Owner's Manual

Lawn tractor 21.0 hp, 42" mower electric start 6 speed transaxle
Table of Contents

Advertisement

[A
WARNING:
TO AVOID SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1. Depress clutch/brake pedal fully and set parking
brake.
2.
Place gearshift
lever in neutral
(N) position.
3.
Place attachment
clutch
in "DISENGAGED"
position.
4.
Turn ignition key "OFF" and remove
key.
5.
Make sure the blades and all moving
parts have completely
stopped.
6. Disconnect
spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE
MOWER
Mower will be easier to remove from the
right side of tractor.
1.
Place attachment clutch in "DISEN-
GAGED" position.
2.
Move attachment
lift lever forward
to
lower mower to its lowest position.
3.
Roll belt oft engine pulley.
4.
Remove small retainer spring, and lift
clutch spring off pulley bolt.
5.
Remove
large retainer spring, slide
collar off and push housing guide out
of bracket.
6.
Disconnect anti-sway bar from chassis
bracket by removing retainer spring.
7.
Disconnect
suspension arms from
rear deck brackets
by removing
retainer springs.
8.
Disconnect front links from deck by
removing
retainer springs.
9.
Raise lift lever to raise suspension
arms. Slide mower out from under
tractor.
IMPORTANT:
If an attachment
other than
the mower deck is to be mounted
on the
tractor, remove the front links and hook
the clutch spring Into square hole in
frame.
TO INSTALL
MOWER
1. Raise attachment lift lever to its
highest position.
2. Slide mower under tractor with
deflector shield to right side of tractor.
3.
Lower lift lever to its lowest position.
4. Connect front links to mower deck and
secure with retainer springs.
5.
Connect suspension arms to rear
deck brackets and secure with
retainer
springs.
6.
Connect
anti-sway bar to chassis
bracket and secure with retainer
spring.
7.
Push clutch cable housing guide into
bracket, slide collar onto guide and
secure with large retainer spring.
8.
Install belt onto engine pulley.
Small Retainer Spring
Clutch
Retainer
Anti-Swa,
Springs
(Both Sides)
Housing Guide
Bracket
Large Retainer Spring
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents