Advertisement
_i
WARNING:
Read and understand
all
instructions.
Failure to follow all instructions listed
below, may result in electric shock, fire and/or
serious personal injury.
SAVETHESEINSTRUCTIONS
WORK AREA
•
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Do not operate power tools in explosive
atmo-
spheres, such as in the presence
of flammable
liquids or gases. Power tools may create sparks
which may ignite the dust or fumes.
ELECTRICAL
SAFETY
•
Don't expose
power
tools to rain. Water entering a
power tool writ increase the dsk of etectdc shock or mal-
funclion.
PERSONALSAFETY
•
Stay alert, watch what you are doing and use
common sense when operating
a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication.
A moment of inatten-
tion while operating power tools may result in serious
personal injury.
•
Dress properly. Do not wear loose clothing or
jewelry. Contain
long hair. Keep your hair, clothing,
and gloves away from moving parts and exhaust.
Loose clothes, iewelry, or long hair can be caught in
moving parts.
•
Do not overreach.
Keep proper footing and bal-
ance at all times. Proper footing and balance enables
better control of the tool in unexpected situations. Do
not use on a ladder or unstabi'e support.
•
Use safety equipment.
Always wear eye protection.
Dust mask must be used for appropriate
conditions.
TOOLUSEAND
CARE
Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
Store idle tools out of the reach of children and
other untrained
persons. Tools are dangerous in the
hands of untrained users.
Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained
tools with sharp
cutting edges are tess likely to bind and are easier to
control
B
Check for misaligement
or binding o! moving
parts, breakage
ol parts, and any other condition
that may affect the tool's operation,
ff damaged,
have the tool serviced before using. Many accidents
are caused by poorly maintained
tools.
Ill
Use only accessories
that are recommended
by
the manufacturer
for your model. Accessories that
may be suitable for one too[, may become hazardous
when used on another tool,
SERVICE
i
Tool service must be performed
only by qualified
repair personnel.
Service or maintenance
performed
by unqualified
personnel could result in a risk of injury.
II
When servicing a tool, use only identical
replace-
ment parts. Follow instructions
In the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions
may create a
risk of electdc shock or injury.
Hold tool by insulated
gripping
surfaces
when performing
an operation
where the tool may contact hidden
wiring or fta cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
ADDITIONAL
RULES
FOR SAFE
OPERATION
•
Do not allow children to operate Hand Vac or play
with Hand Vec as a toy. Close attention Is necessary
when used near children,
•
This Hand Vac is intended for household
use ONLY.
•
Use this Hand Vac ONLY for its intended use as
described in this manual.
Use only the attachments
recommended in this manual.
If Hand Vac is not working properly, has been
dropped, damaged, left outdoors,
or dropped
into
water, return to your nearest Sears Service Center.
Do not abuse cord. Never carry charger or base by
the cord or yank to disconnect from electrical outlet.
Grasp charger, not the cord, and pull to unplug. Do not
allow cord to hang over edge of table or counter or to
touch hot surfaces,
3
Advertisement
