Table of Contents
Advertisement
Press SNOOZE (→ p.5,M.) to temporarily stop the alarm. The alarm
will sound again after 8 minutes unless another key on the clock is
pressed. To stop the ringing completely, press ALARM.
The Single Alarm will automatically disable itself after the
NOTE
clock has gone off at the preset time. The Weekday Alarm
will still be enabled even after the alarm has gone off.
OTHER FEATURES
LOW BATTERY WARNING
When the battery is low, a battery icon will appear on the main unit s
LCD screen.
LCD Display
Description
When the indicator appears on the top line of the
LCD screen, the remote unit battery is low.
When the indicator appears on the bottom line of
the LCD screen, the main unit battery is low.
TROUBLESHOOTING
This section includes a list of frequently asked questions for problems
you may encounter. If your device is not operating as you think it
should, check here before arranging for servicing.
22
Page 24-25
EMR898_GB(02/05)
Problem
Symptom
Check This
-
The remote
Obstacles (either
displayed on
signal
electromagnetic
LCD screen.
cannot be
interference or
objects) are
received.
barring the
remote signal
from reaching
the main unit.
Batteries of
Check LCD
the remote
Display of the
unit are low.
remote unit.
Discrepancies
Another
Check if another
between
remote
remote sensor is
remote and
sensor is
present within the
main unit
using the
area.
readings.
same
frequency
and ID Code.
Measurement
Displayed
The measurement
does not
temperature
method is
seem
data are
different.
accurate.
different
from other
measuring
The areas under
instruments.
evaluation are
different or are
i n f l u e n c e d b y
climate.
23
12/1/03, 10:36 AM
Adobe PageMaker 6.5C/PPC
Remedy
Move the main
unit away from
any sources of
interference,
including other
electronic
devices. Also
try moving the
remote and the
main units
closer.
Install new
batteries into
the remote unit.
Place the remote
sensor closer to
the main unit.
Recalibrate the
units to ensure
synchronization.
The temperature
resolution for
different
products may
also be different.
Place the 2
instruments very
closely for a time
period (no less
than 30 minutes),
avoiding direct
light and air
movements.
Hide quick links:
Advertisement
Table of Contents
