Microsd Card Insertion And Formatting - Oregon Scientific ATC Mini User Manual

Operating Elements -
MicroSD card insertion
1� Insert the MicroSD card until it clicks into place, the metal
contacts should be facing upward.
2� To remove the MicroSD card, push it further into the camera
and it will spring out from the camera for being pulled out.
Insert or remove the MicroSD card only when the camera
MicroSD card formatting
1� Press and hold
2� Press and hold
3� Press
4� When formatting is finished, the camera will give two beeps and the status indicator will
light green�
When the available memory of MicroSD card is less than 10%, the status indicator flashes
blue.
ATCMini – 8
en.indd 8
is turned off.
to turn on the camera.
, and
after the beep to confirm. The status indicator flashes in blue and red alternately�
MicroSD Card Insertion & Formatting
to format the MicroSD card.
8/9/2011 1:17:12