Engine Speed - Craftsman 917.378852 Owner's Manual

6.75 horsepower power-propelled 21" rear discharge rotary lawn mower
Table of Contents

Advertisement

Available languages

Available languages

ENGINE SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal
injury.
If you
believe
that engine
is running
too fast or
too slow, take your mower
to a Sears
or
other qualified
service
center for repair
and adjustment.
CARBURETOR
Your carburetor
is not adjustable.
If your
engine does not operate
properly
due to sus-
pected carburetor
problems,
take your lawn
mower to a Sears or other qualified
service
center
for repair and/or
adjustment.
iMPORTANT:
Never tamper
with the
engine
governor,
which
is factory
set
for proper engine
speed.
Overspeeding
the engine
above the factory
high speed
setting
can be dangerous.
If you think
the engine-governed
high speed
needs
adjusting,
contact
a Sears or other
qualified
service
center, which
has proper
equipment
and experience
to make any
necessary
adjustments.
Immediately
prepare
your lawn mower for
storage
at the end of the season
or if the
unit will not be used for 30 days or more.
LAWN
MOWER
When lawn mower is to be stored for a
period of time, clean it thoroughly, remove
all dirt, grease, leaves, etc. Store in a
clean, dry area.
1. Clean entire lawn mower (See
"CLEANING"
in the Maintenance
sec-
tion of this manual).
2. Lubricate as shown in the Maintenance
section of this manual.
3. Be sure that all nuts, bolts, screws, and
pins are securely fastened.
Inspect
moving parts for damage, breakage
and wear. Replace if necessary.
4. Touch up all rusted or chipped paint
surfaces; sand lightly before painting.
HANDLE
You can fold your lawn mower handle for
storage.
NOTE: The upper handle has an "anti-fold"
bracket located on the right side of the
handle. This bracket prevents the upper
handle from folding forward, which helps
protect control cable(s) from damage.
1. Squeeze the bottom ends of the lower
handle toward each other until the
lower handle clears the handle bracket,
then move handle forward.
2. Loosen upper handle mounting bolts
enough to allow upper handle to be
folded back.
iMPORTANT:
When
folding
the handle
for
storage
or transportation,
be sure to fold
the handle
as shown or you may damage
the control
cables.
o When
setting
up your handle
from the
storage
position,
the lower handle will
automatically
lock into mowing
position.
SQUEEZE
TO FOLD
Lower handle
Operator presence
control bar
Lower
15
Mowing
position

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents