Craftsman 358.351042 Operator's Manual page 10

2.1 cu.in./36cc 2-cycle gasoline chain saw
Table of Contents

Advertisement

or woodintothe cut ur_ _=esaw _
be
removed
ea_. ResWt saw a.d.cpxeUh/
reem_ the cuL Do not use a me_
wed_
Do not etten_ _orestmtyour
ssw w_n _ _ l_ncl_ or hung _ a Io_
tJsea wedgetoremovepln_ed ssw
Turn stay OR: a_l u_ a _c
or
wooden wedge to force cut open.
t
1_Cut
Overcuttlng beans on Ule t_p side of
BUGKING USING A LOG OR
the Ing w.h the bot_n
of gw saw
SUPPOITr STAND
_dow_,_
whe,_
_,
. Remember your r _ cut_ a_'ay_ _
pressure
the compres._on side of the ;og _He-
Undemumng involvescuUJng on the
undersideof the log with top of saw
againstt_e log. When undercuttinguse
lightupwardpressure. Ho_dsaw firmly
and maintaincontrol.The saw wilttend
to push beck toward you.
WARNING:
Never turnsaw upside
dewn to undercut. The saw cannot be
controlledin this position.
fer to the glusb'atlonbelow for your
first and second cut).
• Your first cut should exterld 1/3 of gle
d_._tefofthe_g.
• Rn_h w_hyoursecond cut.
l_Cut
Always make your flint cut on the
compression side of the log.
Second oJt
BUCKING WITHOUT A SUPPORT
• Ovemutthrough 1/3 ofthe d_neter of
me log.
Roll the _0goyer and finishwith ase_
orld overctlL
• Watch for logs witha compresion
side See ib.skation above for cutlk_ . Frequentlyclem _
out of the
logs w_tha compre_sionside.
way to avoid ldpping over them.
UMBING
AND PRUNING
WARNING:
Never climb into a tree to
limb or prune. Do not stand on ladders,
platforms, a log, or in any position
which can _ause you to lose your bal-
ance or control of the saw.
IMPoFrrANT
POINTS
• Watch outforspdngpo_.
Springpoles are small size limbs
w_dch can M1dptoward you, or pull
you off balance. Use extreme caution
when culling small size limbs.
• Be alert for _.
Watch out for
_
that _te bent or und_ pres-
sure.
Avoidbeing smJck by _e
branch or b_ saw when the terudon In
1he wood fibers is released.
10

Advertisement

Table of Contents
loading

Table of Contents