Table of Contents
Advertisement
Warning: Do not remove the 7.0/7.1/7.2 database files when prompted!
Warning: After installing Release 7.3, do not de–install 7.1 (doing so will disrupt your
Release 7.3 install).
Install the Oracle7 Server
2 – 26
Oracle7 Server Getting Started for Windows NT
Use orainst.exe to de–install 7.0/7.1/7.2 Server, Required
Support Files and Utilities.
Refer to the documentation that shipped with your 7.0/7.1/7.2
database for more information about de–installation.
a.
Run orainst.exe in line mode.
b. From the products list, select:
– 7.0/7.1/7.2 Server
– Required Support Files
– Utilities
c.
Choose Remove.
1.
Install the Oracle7 Server for Windows NT
Install the Oracle7 Server for Windows NT. During installation, you
will have the choice of installing the starter database. If you do not
need another Release 7.3 database (in addition to the one that you
are upgrading from 7.0/7.1/7.2), you do not need to install the
starter database.
Additional Information: See Installation for installation steps
and options.
2.
Add an ORACLE_SID key to the NT registry
a.
Create a SID for the to–be–migrated database instance.
For example, choose ABCD as the SID.
Note: If you have chosen to install the starter database during
Release 7.3 installation, Do not use ORCL as the SID (the
starter Release 7.3 database has ORCL as the default SID).
Change the ORACLE_SID from ORCL to ABCD.
Note: SID is limited to four alphanumeric characters or less.
b. Run regedt32.exe in line mode.
c.
Go to \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
Advertisement
Table of Contents
