Optimus 111 Owner's Manual page 31

16-548.fm Page 31 Tuesday, July 20, 1999 4:54 PM
If you have not yet entered any programs,
the TV displays the program entry menu
when you press
PROG
8. Use s/t to select the date when you
SEL
want to record.
To record a program at the same time on
the same day every week, press either but-
ton until the TV displays
desired day of the week.
DATE START
WEEKLY --:-- --:-- --
SUN
SELE CT START DATE
BY SELECT /
TO END PUSH PROG KEY
To record a program at the same time
Monday through Friday, press either button
until the TV displays
DATE START
DAILY --:-- --:-- --
MON-FRI
SELE CT START DATE
BY SELECT /
TO END PUSH PROG KEY
To record a program at a set time today,
press either button until the TV displays
TODAY and today's date.
To record a program at a specific time and
date, press s/t to select the specific
SEL
date.
Press to enter your selection.
SET
9. Use s/t to select the start hour. When
SEL
the correct hour appears, press
use s/t to select the minute, and press
SEL
.
SET
10. Repeat Step 9 to set the end time.
11. Use s/t to select the channel.
SEL
To record from a source connected to the
AUDIO 1/VIDEO 1 IN
s/t until the TV displays
SEL
LINE 2 .
.
and the
WEEKLY
STOP CH
SLP
KEY
: PUSH SET
DAILY MON-FRI .
STOP CH
SLP
KEY
: PUSH SET
. Then
SET
or jacks, press
AV2
LINE or
1
12. Use s/t to select the tape speed (
SEL
, or ).
LP EP
13. Double-check all the set information.
• If the information is correct, press
• If an entry is not correct, press
to move the cursor to the wrong
CLEAR
entry, enter the correct information, then
press .
PROG
Note: The TV displays
if you did not correctly
INCOMPLETE
enter a timer program before pressing
. Check and correct the program,
PROG
then press again.
PROG
The TV displays the timer program set-
tings. To enter more programs, use
to select another program number and
repeat Steps 7–13.
14. Press again. The TV briefly displays
PROG
TURN VCR OFF FOR TIMER RECORD-
.
ING
15. Press to turn off the VCR. The
POWER
VCR displays TIMER.
Notes:
• Be sure that the VCR displays TIMER
when you turn it off. If it does not appear,
check your programming.
• If you insert a cassette with its erase-
protection tab removed and set the VCR's
timer, the VCR ejects the cassette and
flashes TIMER on the display.
• If you set up the VCR to record a cable
program through a cable box, be sure to
leave the cable box turned on and tuned to
the desired station before the timer pro-
gram starts.
• You can manually turn on and operate the
VCR before the set times, but the VCR
starts an automatic timer recording only if
the power is off at the set start time.
,
SP
.
PROG
or
SET
PROGRAM IS
s/t
SEL
31