Advertisement
Available languages
Available languages
1
BAGGER SUPPORT ASSEMBLY
(See Fig. 1A)
Simply hang the support assembly on the bolts.If your
tractor does not have four (4) shoulder bolts installed on
the drawbar, follow the instructions below.
SHOULDER
BOLTS
SUPPORT
ASSEMBLY
TO REMOVE THE SUPPORT ASSEMBLY (See Fig. 1B)
1.
Pull outward on the stop bracket enough to allow support
assembly to be lifted up and away from drawbar.
PULL OUT ON STOP BRACKET TO
REMOVE SUPPORT ASSEMBLY
02643
FIG. 1B
MOUNTING
COVER ASSEMBLY
TO
SUPPORT
ASSEMBLY
(See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor.
1.
Lift cover and align cover bracket with support assem-
bly.
2.
Slide cover assembly down onto the support assem-
bly.
COVER
ASSEMBLY
/
SUPPORT
ASSEMBLY
02646
FIG. 2
Advertisement
