Know Your Trimmer; Recessed Plug; Operating Instructions; Extension Cord - Craftsman WEEDWACKER 358.745240 Instruction Manual

KNOW YOUR TRIMMER
READ THiS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNI]_ Compare the illustrations with your unit to familiarize yourself with the loca-
tion of the various controls and adjustments, Save this manual for future refer-
ence,
Trigger Switch
Assist Handle
Cord
Retainer
Recessed
Plug
Motor Housing
Edge Guide
Debris Shield mer Head
e_____________ ' I_ with 0.065 in.
Line Limiter Blade Trimmer Line
RECESSED PLUG
The RECESSED PLUG is where you at-
tach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn
on the unit. Squeeze the trigger switch
to operate the unit. Release to stop,
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cut-
ting line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help
hold and guide the unit,
TRIMMER HEAD
The TRIMMER HEAD holds the cutting
line and rotates during operation.
EDGE GUIDE
The EDGE GUIDE protects the unit
from contacting the ground during
edging,
OPERATING INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord Gauge
25 Ft. (7,5 m) 18 Gauge
50 Ft. (15 m) 16 Gauge
100 Ft. (30 m) 16 Gauge
Extension cords are available for this
unit at Sears,
Extension Cord
(16 Gauge) ............ 71-85708
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the
handle and around the hook as
shown, Insure the plug and cord are
firmly and fully engaged,
Cord Retainer
6